FROG Road 70 26"
Bike fitting discount 20 % (you will save 28 €)
FROG Road 70 26"
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
Road bike rim brakes
They use the transmission of energy from the lever to the brake arms via a steel cable, are lighter, more affordable and easier to maintain. The braking effect is lower in wet conditions. In addition to the rapid wear of the blocks, dirt can also cause damage or faster wear of the rim.
| Model year | 2021 |
| Gears | 1x10 |
| Groupset | Other |
| Material | aluminium |
| Brakes | Road rim |
| Control type | mechanical |
| product ID | 147817 |
PSI - indicates the pressure to which the manufacturer recommends inflating the tire. 1 atmosphere = 14.7 PSI
TPI (EPI) - the density of the tire's skeleton fibres. The higher the TPI value, the more flexible the tire will be.
Kevlar tire - foot made of Kevlar fibres. The tire can be folded, so it is more practical when moving or storing. It is characterized by a lower weight compared to wire casings and a higher resistance to puncture.
Wire tire - bead made of wire. The tire is inflexible, it is heavier than Kevlar.
Overview of tire sizes and markings
| ETRTO | Dimension in inches | French label | |
|---|---|---|---|
| 26" | 20-559 | 26 x 3⁄4 | |
| 23-559 | 26 x 0.90// 26 x 7⁄8 | ||
| 25-559 | 26 x 1.00 | ||
| 28-559 | 26 x 1.10 | ||
| 30-559 | 26 x 1.20 | ||
| 32-559 | 26 x 1.25 | ||
| 35-559 | 26 x 1.35 | ||
| 37-559 | 26 x 1 5/8 x 1 3/8, 26 x 1.40 | ||
| 40-559 | 26 x 1.50 | ||
| 42-559 | 26 x 1.60 | ||
| 44-559 | 26 x 1.625 | ||
| 47-559 | 26 x 1.75 / 1.80 / 1.85 / 1.90 | ||
| 50-559 | 26 x 2.00 / 1.90 / 1.95 | ||
| 54-559 | 26 x 2.10 / 1.95 / 2.125 | ||
| 57-559 | 26 x 2.25 / 2.125 / 2.20 | ||
| 60-559 | 26 x 2.35 | ||
| 62-559 | 26 x 2.40 / 2.50 | ||
| 64-559 | 26 x 2.50 | ||
| 65-559 | 26 x 2.60 | ||
| 70-559 | 26 x 2.75 | ||
| 75-559 | 26 x 3.00 | ||
| 95-559 | 26 x 3.70 / 3.80 | ||
| 100-559 | 26 x 4.00 | ||
| 115-559 | 26 x 4.50 | ||
| 120-559 | 26 x 4.80 | ||
| 20-571 | 26 x 3/4 | ||
| 23-571 | 26 x 7/8 | 650 x 23C | |
| 40-571 | 26 x 1 1/2 CS | 650 x 38C | |
| 40-571 | 26 x 1 3/8 x 1 1/2 NL | ||
| 47-571 | 26 x 1 3/4 | 650 x 45C // 650 CS Confort | |
| 54-571 | 26 x 2 x 1 3/4 | 650 x 50C | |
| 20-590 | 26 x ¾ | 650 x 20A | |
| 25-590 | 26 x 1.00 | 650 x 25A | |
| 28-590 | 26 x 1 3⁄8 x 1 1⁄8 | 650 x 28A | |
| 32-590 | 26 x 1 3⁄8 x 1 ¼ | 650 x 32A | |
| 37-590 | 26 x 1 3⁄8 | 650 x 35A | |
| 40-590 | 26 x 1.50 | 650 x 38A | |
| 40-590 | 26 x 1 3⁄8 x 1 ½ | ||
| 42-590 | 26 x 1 5⁄8 | 650 x 40A | |
| 32-597 | 26 x 1 1⁄4 |
| Tire width in mm | Wheel rim in mm | ||||||||
| 13C | 15C | 17C | 19C | 21C | 23C | 25C | 27C | 29C | |
| 18 | X | ||||||||
| 20 | X | ||||||||
| 23 | X | X | |||||||
| 25 | X | X | X | ||||||
| 28 | X | X | X | ||||||
| 32 | X | X | X | ||||||
| 35 | X | X | X | ||||||
| 37 | X | X | X | X | |||||
| 40 | X | X | X | X | |||||
| 42 | X | X | X | X | X | ||||
| 44 | X | X | X | X | X | ||||
| 47 | X | X | X | X | X | X | |||
| 50 | X | X | X | X | X | X | |||
| 52 | X | X | X | X | X | X | X | ||
| 54 | X | X | X | X | X | X | |||
| 57 | X | X | X | X | X | X | |||
| 60 | X | X | X | X | X | X | |||
| 62 | X | X | X | X | X | X |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
Clearance -29% fizik Vento Infinito Knit Carbon 2 Wide cycling shoes, black/black
from 269 €
-29%
RRP 379 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
There are currently no reviews