Zeroflats anti-defect milk, 2 l
Zeroflats milk is made of nanoparticles of latex and organic granulate, it clots in the event of a defect and creates a flexible and permanent connector.
Zeroflats serve as a substitute for souls. In the event of a puncture, you do not have to get off the bike, the milk will immediately repair the puncture.
Zeroflats can be used on both tubeless and regular tires.
Thanks to Zeroflats, you can reduce the weight of the wheel by up to 200 g.
Zeroflats recommends using Schwalbe, Continental, Kenda tires. It is important to use jackets that have a quality bead.
Zero Flats can be blown with CO2 canisters.
Zeroflats can be applied either through the valve or before putting on the tires.
Precautions:
Avoid contact with eyes and clothing during installation. Zero flats contains ammonia (< 0.2%), which can cause eye irritation. Use safety glasses. If Zero flats gets in your eyes, wash them with clean water. Zero flats is soluble in water, do not let it dry if it gets on clothing, and wash it as soon as possible.
Installation:
You need 60 ml of Zeroflats milk to seal 1 wheel. If you use Tubeless, TNT or Tubeless Ready tires, you only need a workshop pump or CO2. Place the tire on the rim and inflate it so that the bead of the tire fits into the rim. Then unscrew the valve and pour 60 ml of Zeroflats and inflate to the desired pressure. When installing regular tires, the procedure is the same, but you will need a compressor to inflate.
Recommended dosage
Wheels 26" 60 ml, 27.5" 90 ml, 27.5" + 120 ml, 29" 120 ml, fatbike 180 ml.
Volume: 2,000 ml
product ID | 75378 |
