Super B TB-1065 bottom bracket wrench
Super B TB-1065 bottom bracket wrench
Wrench for square and Octalink type centre axes, for use on a 24 mm side key or 1/2" ratchet. The wrench can also be used to remove the Race Face Cinch converter.|
Suitable for Shimano®, ISIS Drive® (20-T center chainrings), FSA®, Race Face®, Truvativ® and TOKEN®
|
| product ID | 3132 |
Dobrý deň, chcem sa spýtať ohľadom vnútorného frézovania ... niektoré ISIS stredy potrebujú priechodnosť cca 24mm kvôli širokému montážnemu dorazu osky. Nakoľko nie je fotka zpredu, neviem si to vizuálne posúdiť sám, či je sťahovák univerzálny aj pre ISIS ... či sa mám poobzerať po drahšej variante typu Parktool a pod?
Dobrý deň,
ospravedlňujeme sa za neskorú odpoveď. Sťahovák nemáme skladom, takže Vám nevieme preveriť jeho použitie aj na ISIS.
Dobrý deň,
Tento kľúč má tieto parametre ? 20 výstupkov a priemer je v 32mm. Aj kľúč s katalógovým číslom 48556 má tieto isté parametre ?
Viete mi napísať aká je šírka je toho jedného zubu ? Mal som požičaný jeden sťahovák a ten mal šírku zubu 1,6 mm a nezapadol mi do matice.
Ďakujem za informáciu.
Dobry den prajem,
ospravedlnujeme sa za neskorsiu odpoved
Ano, jedna sa o kluc s 20 vystupkami, vonkajsi priemer je cca. spominanych 32 mm. Rovnakym rozhranim disponuje aj spominany kluc s ID: 48556.
O ake stredove zlozenie sa vo Vasom pripade jedna? Sirka jednotlivych zubov je standardizovana.
Pre lepšie uchytenie / dotlačenie do matice stredového zloženia sa niekedy používa "skrutka", ktorá sa naskrutkuje do osky a kľúč tak tlačí smerom do matice.
Máte niečo také v sortimente? Ďakujem
Dobry den,
zial takyto typ samostatnej dodatocnej servisnej skrutky v ponuke nemame.
Odporucame skor skusit predajne so spojovacim materialom.
V kľukách sú metrické závity? Klasika len pravé?
Ak áno, tak kus závitovej tyče, jedna podložka a jedna matka spravia čo potrebujem.
Octalink a ISIS stredy/kluky vyuzivaju standardne zaistovacie M15 skrutky.
Dobrý deň, chcel by som sa spytat mam race face cinch, vidim ze kluc uz nemate v ponuke. Aky by ste mi odporucili namiesto tohto?
Dobrý deň,
ospravedlňujeme sa za neskoršiu odpoveď
Kľúč je už každopádne opätovne dostupný
Dobrý deň,
Kúpil som si u Vás tento kľúč. Viete mi, prosím poradiť, akým momentom sa doťahuje Shimano stred?
Ďakujem Vám.
Dobry den,
cartridgeove Shimano stredy (non-Hollowtech II) sa utahuju na predpisany moment 49.1–68.7 Nm.
Potrebujem prípravok na povolenie matice stredového taniera (ozubeného kolieska) na elektro bike Crussis.
Je to ono?
Dobry den,
maju dane kluky akekolvek typove oznacenie? Prip. neuvadza ho vyrobca v specifikacii Vasho modelu bicykla?
Dakujem!
Pekný večer. Na kľuke je BAFANG AC08-2 ale ja potrebujem zdemontovať prevodník nie kľuku. Tú viem.
Bafang zial neudava blizsiu specifikaciu - kazdopadne ak disponuje dana matica 20 drazkami a priemerom 32 mm, tak by kluc mohol sadnut. Prip. skuste kontaktovat pre blizsie info Vasho predajcu Crussis.
Ak kluc objednate a nesadol by, tak ho samozrejme nie je problem vratit - https://www.mtbiker.sk/shop/informacie/vsetko-o-nakupe.html.
Dobrý deň,bude tento kľúč v ponuke? Pri hodení do košíka mi píše: Produkt neexistuje! Ďakujem.
Dobrý deň,
Skúste teraz, už by to malo ísť.
Už je to v poriadku,ďakujem.
Dobrý deň, je tento kľúč vhodný aj na zapuzdrenú 4 hrannú osku?
Koľko zubov je na tom kľúči? Potreboval by som 20 zubový.
Dobrý deň, náradie ma 20 zubov.
Da sa pouzit aj na center lock na kotuce?
Zdravim, na kotuce je vhodny tento - https://www.mtbiker.sk/shop/servis-a-trening/naradie/stahovaky-na-kazety/kovys-stahovak-na-kazetu-shimano-hg-kaleny-17891.html
Dobrý deň. Na akú hlavu je tento klúč?
Dobry den,
je to na standardnu racnu.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

I bought the key like a cat in a bag because I needed to loosen the converter nut on the Bafang 400 engine and I didn't know if it would fit. I chose according to the picture and the number of cuts. The key fit perfectly and I loosened the nut without any problems. The advantage of the wrench is that it can be directly attached to the torque wrench.
Automatically translatedGood key and worth the investment. I like that it can be put directly on the ratchet and there is no intermediate stage in the form of a nut. With it, I pulled out the very tight center, where the teeth on the center were already bending but the key held.
Automatically translatedThe key is well made, it fits perfectly and the advantage is the 1/2" input, so you can use it in a ratchet, torque wrench and even an impact wrench (but don't try an impact wrench, that belongs only to a pig )
Automatically translatedAlthough it may not look solid at first glance, it is actually solid. Possibility to put it directly on the ratchet without the need for an intermediate piece. It helped to untwist a really tight center without a problem.
Automatically translatedIt works like me. On a children's bike, I scraped off one side of the middle,... and the other side, the one on the right, I ripped off But the key lasted everything, and it's like new I recommend ?
Automatically translated
Olyan szerszámot kerestem, ami tartósságban megfelel alkalmi felhasználásra, és nyomatékkulcsre helyezhető, ez mindet tudja.
Translate by GoogleShow the original
Hned na prve pouzitie povolil stred, s ktorym som nic nerobil viac ako 10 rokov. Za mna super naradie.
Translate by GoogleShow the originalHe enabled octalink for the first time with absolutely no problems. It is robust so you don't need to be afraid to lean into it.
Automatically translatedIt's great that a person can turn it with both the Gola racket and the French at the same time. Good, hard steel.
Automatically translated
Kúpene a pouzite pri cisteni stredoveho zlozenia. Vyhodou je ze sa da nastrknut na racnu.
Translate by GoogleShow the originalexcellent key that fits the ratchet, robust design, will last for many years
Automatically translated
Jó minőségű és ár-érték arányú dugókulcs.Már jó párszor használtam,bevált.
Translate by GoogleShow the originalGood helper, I threw about 5 axles with it and will see how long it lasts.
Automatically translated
Tak po dlhšom používaní môžem len odporučiť. Keď som sťahoval veľmi dotiahnutý (skoro až zapečený) stred, tak som sa bál, či to tie zuby vydržia a vydržali.
Translate by GoogleShow the original
Super, povolil som aj zapečený stred, z ktorého iný kľúč vyskakoval.
Translate by GoogleShow the originalQuality walnut, it also withstood quite a lot of force on the rusty center.
Automatically translatedIt also held up to a fairly baked middle. It is of course at 1/2
Automatically translated
uplna spokojnost, vyhoda pouzitia rovno na velku gola racnu.
Translate by GoogleShow the original
Drahší značkový by som nekupoval určite. Funguje výborne.
Translate by GoogleShow the original
kupoval som si na servis, toto mi este chybalo v naradi.
Translate by GoogleShow the originalGood helper for bike service, good workmanship.
Automatically translated