Muc-Off Tubeless Kit DH/Trail/Enduro tubeless conversion kit
Muc-Off Tubeless Kit DH/Trail/Enduro Tubeless Conversion Kit
Kit for installing 2 tubeless MTB tires on rims with a width of 28-30 mm.Instructions for use:
- Remove all old tape and clean the rim.
- Before applying the tape, make sure the rim edge is clean and dry.
- Take the tape and align it on the opposite side of the valve.
- Start by peeling off a small amount of tape and holding it pressed with your thumb or finger.
- Continue holding while you peel off the tape and stick it firmly. Once you have a few cm on the tape, the adhesive tape will stick and holding is no longer necessary.
- Continue all the way around the edge (if it has a large concave layer, you can pull the tape and stretch it to fill all edges).
- Overlap the tape by approximately 10 - 15 cm.
- Leave a small amount unpeeled so you can cut off the rest.
- After cutting the notch and pulling the tape down, create a seal.
- Go around the edge with your thumb and make sure there are no air pockets or contaminated areas.
- Once you are satisfied with how it looks, use a small sharp object to find the valve hole and cleanly puncture the tape, ready for the valve.
- Grab your tubeless valve and remove the lock ring and O-ring.
- Choose the correct rubber grommet for the rim tape and insert the valve into the rim.
- Install the O-ring and lock ring to secure the valve (do not overtighten, it could damage the rubber).
- Reinstall the tire of your choice, being careful not to damage the tape (using tire levers etc.).
- Inflate the tire to seat it (you should hear popping around the rim).
- Release the air and remove the valve core using the spare valve cap.
- Grab the sealant pouch and shake it.
- Unscrew the cap and attach the valve to the valve in the correct position.
- While holding the pouch, turn the wheel downwards so the pouch is now upside down.
- Insert the sealant by rolling the pouch downwards.
- Turn the wheel back to the right and remove the pouch.
- Reinsert the valve core and inflate to your pressure.
| Volume | 2x 140 ml |
| Package contents | rim sealing tape length 10 m, width 30 mm2 pcs patches2 pcs tubeless valves in black, length 44 mm2 pcs tubeless sealant |
| product ID | 107455 |
Zdravim vystaci sada na konverziu 2x 29" jedna 2.4 druha 2.5 ?
Dobrý deň,
áno, set obsahuje 2x 140 mL balenie tmelu, na 29" trail/enduro/DH plášte to bude akurát.
Samozrejme, viete dokúpiť "do zásoby" aj ďalší tmel - https://www.mtbiker.sk/shop/servis/tmely-a-lepidla/muc-off-no-puncture-hassle-tmel-1-liter-.html.
zdravim v baliku viete mi vymenit ventilky za inu farbu ??
Dobrý deň,
žiaľ v rámci tohto balíku nie, jedná sa o originálne balený produkt, ktorého súčasťou sú čierne ventilky.
Nazdar, na akú je to veľkost" kolies? Ďakujem
Ahoj,
v baleni sa nachadza 10 m pasky - takze je mozne nastrihat nasledne na akukolvek velkost kolies.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

Pri lepení pásky odporúčam 2 ľudí.
Translate by GoogleShow the original
Nemám čo vytknúť.
Translate by GoogleShow the original
Dosť husté mlieko, ťažšia aplikácia cez striekačku, páska a ventilky OK
Translate by GoogleShow the original
Jedina skoda ze tento set neobsahuje inu farbu ventiliek.
Translate by GoogleShow the original
Neviem ako sa to da. OMG
Translate by GoogleShow the original