Finish Line Chill Zone anti-corrosion spray, 500 ml
Finish Line Chill Zone spray, 500 ml
Chill Zone is your last resort if you need to loosen a stuck seatpost from the frame, a rusted bolt, a stuck thread or get an old rusty chain moving again. The preparation freezes any metal down to -45 °C. This will cause the metal to shrink and loosen the joint. Simply spray Chill Zone on the item for 10 to 20 seconds, wait 60 to 90 seconds and release the part.
Chill Zone is probably the most advanced corrosion penetrant. Before you break your stick over a stiff crank bolt, a rusted derailleur spring, an overgrown seatpost in your frame, or a rusted chain, try the Chill Zone! Parts on the bike that you would have to throw away can be refurbished so that you can ride again the next day.
A special cooling medium freezes the metal down to -45°C. This causes the metal to shrink and creates microcracks in corrosion and galvanically fused metal parts. The penetrating release agent then breaks down and washes away the rust. Thanks to the Chill Zone, most stuck parts will regain full functionality.
How to use: Simply spray the rusted part for 10-20 seconds and wait 2-3 minutes for the release agent to fully absorb and break up the rust. For heavily rusted welds, spray longer (30-60 seconds) for maximum freezing effect, then wait ten minutes to one hour for the rust to thoroughly break down. When renewing a bicycle chain, soak one small part at a time.
product ID | 258945 |

There are currently no reviews