WeeRide SafeFront deLUXE front child bike seat
- WeeRide front child bike seat is a winning design, created for a higher standard for the safety and well-being of the rider and especially the child.
- It will allow you and your child to experience shared moments of well-being while riding, thanks to a greater sense of control over the bicycle and your child.
- The WeeRide bike seat is suitable for most bikes and attaches to an independently mounted support bracket.
- The support bracket is part of the package and is mounted on the front of the frame under the handlebars and the rear seat post of the bicycle.
- The seat is then attached to the support bracket with a hand screw, which is equipped with a child lock.
- Parents appreciate far better stability while driving, even on uneven terrain.
- Unlike other seats that are mounted on the front frame under the handlebars of the Weeride seat, the rider will appreciate the center of gravity of the child's weight "in the middle" of the bicycle, which helps stability and better maneuverability.
- All this under constant interaction between the rider - parent and child. An absolute driving experience.
- Higher safety than with rear seat seats, as the child is constantly in sight, fastened with a 5-point strap system and protected by the parent's arms in the event of problems.
- The bicycle seat is designed for children aged 9 months to 4 years, and weighing up to 15 kg, which is the European standard EN13209.
- But it depends on how fast your child grows, so these data are indicative (our own children were able to sit upright and could ride with us as early as 9 or 8 months).
- Professional dealers and active cyclists have confirmed that the WeeRide bicycle seat can also be mounted on bicycles that other seats do not fit.
- The bike seat is unique in design and suitable for fully sprung mountain and trekking (cross) bikes.
- Slightly extended legs are not a problem at all during the ride, and even if the rider feels it from the beginning, he will get used to it very quickly.
- If you have any questions, ask - a hundred times!
-We went through the choice of seat ourselves and we know that it is not easy to decide.
| Location | Front |
| product ID | 41787 |
•
Dobrý deň. Ako je na tom táto sedačka s montážnou na nové celoodpružené elektro bicykle ktoré majú hrubé rámy kôly integrovanej batérií, bude sa dat namontovať? Nevadia jej 29 palcové kolesá? Pripadne nemôže byť problém aj teleskopická sedlovka?
Ďakujem za odpoveď
•
Dobrý deň,
kľúčový je priestor na hlavovej trubke - viď. posledná produktová fotka - musí byť dostatočný kvôli možnosti uchytiť nosnú konzolu sedačky. Po namontovaní tohto adaptéru teda vlastne vôbec nezáleží na tom, aký tvar má zvyšok bicyklu/rámu.
Ak si prípadne nie ste istý, tak samozrejme tak ako pri akomkoľvek inom produkte, aj v tomto prípade máte možnosť sedačku do 30 dní vrátiť, ak Vám nebude vyhovovať, viď. https://www.mtbiker.sk/shop/informacie/vsetko-o-nakupe.html, časť "Čo ak sa mi tovar nepozdáva?".
•
Dala by sa táto sedačka namontovať na Ghost Lector LC1 2017?, alebo neodporúčate. Ďakujem.
•
Dobrý deň,
Na karbónové rámy sa neodporúča montovať detské sedačky.
•
Dobrý deň, dá sa táto sedačka namontovať na CTM RAWER xpert 2014?
Ďakujem
•
Dobrý deň,
Pokiaľ máte medzi predstavcom a hornou rámovou trubkou min. 3mm priestor (viď. posledný obrázok) tak sedačku bude možné uchytiť.
•
Zdravim,mam Cube Stereo 140 hybrid,myslite ze pojde nahodit sedacka?
Dik
•
Dobrý deň,
Obávam sa že to nebude možné nakoľko horná rámová trubka nie je rovná a za rám pomocou adaptéra to uchytiť nepôjde http://www.weerideuk.co.uk/Gallery/kanga%20measurementsLge.jpg
•
Dobrý deň,
Na základe infa od dodávateľa opravujem predchádzajúcu odpoveď. Dodávaná nosná konštrukcia pôjde uchytiť na Váš rám. Na montáž stačia 3 mm nad zvarom hornej rámovej a hlavovej trubky (viď. 6. obrázok). Čiže pokiaľ máte tento priestor minimálne 3 mm tak sedačka pôjde namontovať.
•
dobry mam RB Bandit pevny ram. je mozne tuto sedacku nan namontovat?
•
Dobrý deň,
pokiaľ má rám rovnú hornú trubku, tak je možné túto sedačku namontovať priamo. Ak je šikmá, je potrebné použiť priložený adaptér - montáž vidno v druhom videu pri produkte.
•
Dobry den, je mozne sedacku namontovat na CTM Slash 2.0?
Dakujem
•
Dobrý deň,
Nosná tyč sa montuje na sedlovku a rám. Pokiaľ máte na ráme minimálne 3 mm nad zvarom hornej rámovej a hlavovej trubky (viď. 6. obrázok) tak nosná tyč pôjde uchytiť na rám.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
Sedačka je super aj napriek malemu ramu sa mi podarilo ju nahodit. jediny minus je ze je len do 15kg ale zatial ju vyuzivame naplno kazdy den.
Translate by GoogleShow the original
výborná, stabilná
Translate by GoogleShow the original