Shimano GRX FC-RX810-1 HT II crankset, 1x11, 40T
Shimano GRX FC-RX810 HTII cranks
Shimano GRX stands out from the rest of the world of similar components thanks to its specific ergonomics, optimized gears, great reliability and quiet operation of the shifting system. This is not an elaborate set of road components. It represents a view of how cyclists want to explore their world. GRX is a challenge to find new places and experiences that empower us all.|
Optimal transmission suitable for different terrains and driving styles
|
|
Smaller jumps when shifting make it possible to maintain rhythm and cadence
|
|
Shift options meet the specific requirements of driving on unpaved roads
|
| Groupset | Shimano GRX |
| Gears | 1x11 |
| Crank length | 170 mm, 172.5 mm, 175 mm |
| Technologies | Hollowtech II, HG-EV. |
| Recommended bottom bracket | thread: SM-BBR60, pressfit: SM-BB72 |
| Q-factor | 151 mm |
| Chain line | 49.7 mm |
| Bolt spacing | 110 mm |
| Weight | 644 g |
| Number of teeth | 40T |
| Material | aluminium |
| product ID | 87268 |
Variant Shimano GRX FC-RX810-1 HTII kľuky, 42T, 1x11
Dobrý deň,
chcel by som sa spýtať, či tieto kľuky vime napasovať do rámu GT Grade Carbon Elite 2021 - šírka domčeka je 73mm, aktuálne je tam stredové zloženie FSA PF30 - viem, že ho v prípade týchto kľúk budem musieť vymeniť, len ma zaujíma, či ich tam vôbec viem dostať - tzn. aké stredové zloženie by som musel dokúpiť.
Ďakujem.
Dobry den, toto je ale velmi nestandardna sirka domca pre Press fit. Tazko sa to aj hlada. Kazdopadne skontrolujte si priemer osi na klukach. Ak je 24 mm tak nemusite menit stredove zlozenie. Ak je vsak os tensia, ako na niektorych FSA klukach byva 19 mm, tak potom bude potrebne hladat nieco specificke ako napr. toto: https://www.bikesportadventure.com/gb/bottom-brackets/44270-fsa-movimento-centrale-bb-pf30a-73-smn-per-telaio-cannondale-pf30a-4710243909041.html?utm_source=chatgpt.com
Avsak treba si dat pozor ci aj priemer otvoru na stredove zlozenie je rovnaky. V tomto pripade ide zrejme az o 46 mm oproti beznym 41 mm.
Ďakujem. Už som tieto kľuky zavrhol. Vo všetkých zdrojoch som našiel, že na 73mm rám majú krátku osku. Písal som aj na podporu Race Face kvôli tomuto stredu (https://www.raceface.com/products/pf30-24mm?srsltid=AfmBOorw1s36ZSTksXwbxEF34Oh1JysrxwVYKEBglQHA5a6QiBTiAXid&variant=31976320761938) ktorý máte aj tu na MTBikeri a vyzeral, že by mohol byť, ale odpoveď bola:
"That BB would fit the frame, but it does have about 20mm of external bearings and cups, so that is more of a MTB width. The minimum internal width of that setup on a 73mm shell is about 95mm."
A 95mm je priveľa, ľavá kľuka by nebola na doraz, takže som zmenil taktiku a kľuky pôjdu Sram Rival 1x12 DUB Wide (píšem pre prípad, že niekto rieši podobný problém).
Variant Shimano GRX FC-RX810-1 HTII kľuky, 42T, 1x11
Dobry den, chcem sa spytat, mam bike CTM KOYUK 3.0 olivovo zeleny. Chcel by som vymenit kluky za tieto GRX len neviem ake stredove zlozenie mam potom dokupit? kedze su tam teraz kluky FSA OMEGA DM, 40T a stredove zlozenie nebude pravdepodobne pasovat. Ďakujem.
Dobry den,
sadne akekolvek BSA Shimano HTII cestne stredove zlozenie, napr.: https://www.mtbiker.sk/shop/komponenty/stredove-zlozenia/misky-hollowtech-ii-gxp/shimano-ultegra-sm-bbr60-stredove-zlozenie-bsa-68-mm-ht-ii-cestne-p4911.html.
Variant Shimano GRX FC-RX810-1 HT II kľuky, 1x11, 40T
Dobrý deň. Prosím o radu. Mám kľuky FSA Gossamer Pro so stredom BB386EVO. V prípade výmeny kľúk za GRX RX810 bude nutné vymeniť aj stred? Je možné u vás zakúpiť tieto kľuky s 38T prevodníkom? Ďakujem, Ondrej.
Dobry den,
aky mate ram? KAzdopadne 386Evo stredy zial s Hollowtech II klukami kompatibilne vo vseobecnosti nie su.
38T variant kluk zial dostupny nie je ani u nasho dodavatela, jedina je mozne dodatocne dokupit 38T prevodnik - https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/prevodniky/wolf-tooth-110-bcd-4-bolt-prevodnik-pre-shimano-grx-38-zubov.html.
Variant Shimano GRX FC-RX810-1 HT II kľuky, 1x11, 40T
Dobrý deň. Chcem sa spýtať či je možné použiť stredové zloženie GRX na CTM Koyuk 1.0 2022. Ďakujem
Dobrý deň,
Áno GRX kľuky bude možné použiť.
Variant Shimano GRX FC-RX810-1 HT II kľuky, 1x11, 40T
Je to prosím narrow wide?
WARNING
For assistance with installation, adjustment, and replacement of products not found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions should always be followed in order to prevent personal injury, physical damage to equipment and the surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to equipment and surroundings.
WARNING:
Do not disassemble or modify the product. This may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
Before riding the bicycle, check that the crank arms are not cracked. If there are cracks, the crank arm may break and you may fall off the bicycle.
Be careful not to allow parts of your clothing to get caught in the chain during riding. If you do, you may fall off the bicycle.
CAUTION:
Be careful and do not touch the gear teeth. There is a danger of injury.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

Variant Shimano GRX FC-RX810-1 HTII kľuky, 42T, 1x11
Prechádzal som z 3x9 na 1x11 z octalinku. Kľuky idú hladko, zatiaľ čo som skúšal tak reťaz nespadla. Sú naozaj ľahké. Za mňa túto investíciu neľutujem. Išiel by som do nich opäť.
Translate by GoogleShow the originalVariant Shimano GRX FC-RX810-1 HT II kľuky, 1x11, 40T
OK, škoda, že sá tak ošucháva farba od tretry, ale to nie je podstatné ?
Translate by GoogleShow the originalVariant Shimano GRX FC-RX810-1 HT II kľuky, 1x11, 40T
V pohode, váha 675g
Translate by GoogleShow the originalVariant Shimano GRX FC-RX810-1 HT II kľuky, 1x11, 40T
moze byť
Translate by GoogleShow the originalVariant Shimano GRX FC-RX810-1 HT II kľuky, 1x11, 40T