Marin Bobcat Trail 3 29 bike, gray/blue
Choose in-person pick-up at the store and decide on the spot.
Bike fitting discount 20 % (you will save 28 €)
Marin Bobcat Trail 3 29 bike
The Marin Bobcat Trail 3 is an affordable mountain bike designed for riders who want a reliable and fun machine for their first trail experience. The Series 2 aluminum frame offers a balanced combination of comfort, stability, and playfulness, making it ideal for recreational riding as well as exploring lighter terrain.The SR Suntour suspension fork helps to absorb bumps and increase control on the trails, while the 9-speed microSHIFT drivetrain provides ample gear range for both climbs and flats. Tektro hydraulic brakes provide reliable braking performance in a variety of conditions.
Suitable not only for commuting, but also for weekend trips outside the city. You can ride on cycle paths, unpaved roads and in easy terrain. If you ride more demanding terrain or more frequently, you will need to fine-tune more often.
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
Coil fork
Provides adequate comfort and is usually installed on bicycles for recreational and less demanding riding. The disadvantage is its relatively heavy weight.
29” wheels
The advantage is better terrain passability, better rolling and traction. However, they are heavier, which also applies to tires.
| Frame |
Series 2 6061 Aluminum, 29" Wheels, Low Standover, 68 mm BB shell, 141 mm Forged Dropouts, IS Chainstay Disc Mount, Internal Housing
|
| Fork |
SR Suntour XCM HLO, 120 mm Travel, Hydraulic Lockout, 46 mm Offset
|
| Shifting |
MicroSHIFT Advent 9 Trail
|
| Derailleur |
MicroSHIFT Advent 9, Clutch
|
| Cassette |
SunRace 9-Speed, 11-46T
|
| Chain |
KMC X9
|
| Cranks |
Alloy Crank, Steel Narrow-Wide Chainring, 32T
|
| Front brake |
Tektro M280 Hydraulic Disc, 180 mm Rotor
|
| Rear brake |
Tektro M280 Hydraulic Disc, 160 mm Rotor
|
| Brake levers |
Tektro M280
|
| Rims |
Marin Aluminium Double Wall, 25 mm Inner, Pinned Joint, Disc Specific
|
| Hubs |
Forged Alloy, Disc, 32H
|
| Tires |
29x2.25"
|
| Seat post |
Marin Alloy, 30.9
|
| Saddle |
Marin MTB
|
| Stem |
Marin Alloy, 31.8 mm Clamp, 45 mm
|
| Handlebars |
Marin 31.8 Riser, 12 mm Rise, 780 mm Width
|
| Grips |
Marin MTB, Closed End
|
| Headset |
FSA No.10-P
|
| Pedals |
Nylon Platform
|
| Spokes |
14g Black Stainless Steel
|
| Bottom bracket |
Sealed Cartridge Bearings, Square Taper
|
| Sex | Men, Unisex |
| Model year | 2026 |
| Gears | 1x9 |
| Groupset | microSHIFT ADVENT |
| Size | M, L, XL |
| Colour | grey/blue |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc |
| Fork | Spring |
| Fork travel | 120 mm |
| Dropper post | no |
| Control type | mechanical |
| product ID | 393608 |
| Bike size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | < 168 cm | 168 - 178 cm | 178 - 188 cm | 188 - 193 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
Sale -14% Leatt Endurance 6.0 Clip-in clipless pedals, black
119 €
-14%
RRP 169 €
Sale -52% Leatt HydraDri ProClip 8.0 Boa cycling shoes, black
from 139 €
-52%
RRP 289 €
Sale -56% Leatt ProClip 9.0 Race Boa cycling shoes, black
from 159 €
-56%
RRP 399 €
-10% Marin set of rubber grommets for aluminium and steel frames
26.99 €
-10%
RRP 29.99 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
There are currently no reviews