Rocky Mountain Altitude Carbon 90 29 bike, purple/black
Choose in-person pick-up at the store and decide on the spot.
Bike fitting discount 50 % (you will save 70 €)
Rocky Mountain Altitude Carbon 90 RE C1 29 bike
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
Carbon frame
Lightweight, stiff and at the same time still flexible material that absorbs shocks well and increases comfort. A higher price is to be expected.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
Air fork
The best option in terms of weight and comfort. Provides more adjustment options (rebound, compression). Requires regular service - the service cycle is specified by the manufacturer.
Air shock
When buying a bicycle, it is necessary to set it to the required pressure according to the weight of the rider (specified by the manufacturer of the shock absorber, a shop assistant can also help you). Can provide several ride and suspension adjustment options. Requires regular check-up and is also more demanding to service. Compared to the spring one, it is significantly lighter.
29” wheels
The advantage is better terrain passability, better rolling and traction. However, they are heavier, which also applies to tires.
| Fork |
FOX 38 performance, 44 mm offset, 170 mm travel
|
| Shock |
FOX Float X2, 230x60 mm, 160 mm
|
| Shifting |
Shimano XTR
|
| Derailleur |
Shimano XTR
|
| Cassette |
Shimano XTR, 10-51T
|
| Chain |
Shimano XTR 12-speed
|
| Cranks |
Shimano XTR, 32T, 170 mm Crank Length
|
| Brakes |
Shimano XTR Trail 4 Piston, RT-86, 203 mm/203 mm
|
| Rims |
Race Face Turbine R Wheelset, Tubeless Ready – Tape, Valves Incl, 28H
|
| Front hub |
Race Face Vault Boost 15 mm
|
| Rear hub |
Race Face Vault Boost 148 mm, RMB Axle, 163 mm x 12 mm x 1.5 mm
|
| Tires |
[F] Maxxis Minion DHF 2.5 WT 3C MaxxGrip DD Tubeless Ready, [R] Maxxis Minion DHR II 2.4 WT 3C MaxxGrip DD Tubeless Ready
|
| Seat post |
Race Face Turbine R (by Fox) Dropper 30.9 mm, 175 mm
|
| Saddle |
WTB Volt Race, Cromoly Rails, 142 mm Width
|
| Stem |
Race Face Turbine R, 0° Rise, 40 mm
|
| Handlebars |
Race Face ATLAS
|
| Grips |
Ergon GD1 EVO Lock On
|
| Headset |
FSA Orbit NO.57E, 36°x45° Bearings, 30.2 mm x 41 mm x 7.1 mm Upper, 40 mm x 51.8 mm x 7.5 mm Lower, 1.5” Crown Race
|
| Sex | Men, Unisex |
| Model year | unspecified |
| Gears | 1x12 |
| Groupset | Shimano XTR, Shimano XT |
| Colour | purple |
| Material | carbon fiber |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc |
| Fork | Air |
| Fork travel | 170 mm |
| Rear travel | 160 mm |
| Dropper post | yes |
| Shock type | Air |
| Control type | mechanical |
| product ID | 357337 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
savings Rocky Mountain Instinct C50 TOUR C1 29 bike, gold/red
3,499 €
savings
RRP 5,599 €
savings Rocky Mountain Instinct Carbon 50 Tour C1 29 bike, blue/orange
3,899 €
savings
RRP 6,099 €
Sale -10% Marin Alpine Trail Carbon 2 29 bike, black/silver
from 4,049 €
-10%
RRP 4,699 €
savings Rocky Mountain Slayer Carbon 50 27.5 bike, green/gold
3,499 €
savings
RRP 6,299 €
savings Shimano XT PD-T8000 pedals, single sided + cleats SM-SH56
81.99 €
savings
RRP 129 €
Sale -50% Leatt ProClip 6.0 Trail Boa cycling shoes, black
from 119 €
-50%
RRP 239 €
Sale -56% Leatt ProClip 9.0 Race Boa cycling shoes, black
from 159 €
-56%
RRP 399 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
There are currently no reviews