Shimano Ultegra FC-R8100 HTII crankset, 2x12, 52/36T
Shimano Ultegra FC-R8100 HTII cranks
|
Optimal balance of stiffness, strength, weight and rotational performance
|
|
HOLLOWGLIDE chainring structure reduces weight but maintains strength for faster, more precise shifting
|
| Groupset | Shimano Ultegra |
| Gears | 2x12 |
| Crank length | 170 mm, 172.5 mm, 175 mm |
| Weight | 711 g |
| Used technology | Hollowtech II, Hollowglide |
| Compatible p. composition | SM-BBR60 (Thread), SM-BB72-41B (Press Fit) |
| Number of teeth | 52/36T |
| For frame width | 68/70 mm |
| Derailleur spacing | 110mm/110mm |
| Material | aluminium |
| Chain line | 44.5 mm |
| Q-Factor | 148 mm |
| product ID | 147845 |
Variant Shimano Ultegra FC-R8100 HTII kľuky, 2x12, 52/36T
Pasujú tieto kľuky do rámu Bianchi OLTRE XR4 so šírkou rámu 86,5 mm so stredovým zložením Shimano SM-BB72-41B?
Dobrý deň,
Áno kľuky budú sedieť.
Variant Shimano Ultegra FC-R8100 HTII kľuky, 2x12, 52/36T
Zdravim, tieto kluky vo velkosti 165mm nebudu v dohladnej dobe? Dakujem!
Dobrý deň,
aktuálne nie - sú nedostupné.
Môžeme preveriť či budú na objednávku - kontaktujte nás emailom: [email protected]
Variant Shimano Ultegra FC-R8100 HTII kľuky, 2x12, 52/36T
Dobry den. Aka je dostupnost 52x36 s dlzkou kluk 170mm ? Dakujem.
Dobrý deň,
u dodávateľa je dostupná iba verzia 170mm 50/34Z.
Variant Shimano Ultegra FC-R8100 HTII kľuky, 2x12, 52/36T
Zdravim, pasuje to aj na 2x11? vďaka.
Dobry den,
zial nie, tieto kluky su vhodne len pre 2x12 rychlostny setup.
Variant Shimano Ultegra FC-R8100 HTII kľuky, 2x12, 52/36T
nezmysel...v pohode to slape na 2x11 je to vyskusane
WARNING
For assistance with installation, adjustment, and replacement of products not found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions must always be followed in order to prevent personal injury and physical damage to equipment and the surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to equipment and surroundings.
WARNING:
Do not disassemble or modify the product. This may cause the product to malfunction, and you may fall unexpectedly and be seriously injured.
Before riding the bicycle, check that the crank arms are not cracked. If there are cracks, the crank arm may break and you may fall off the bicycle.
Be careful to keep parts of your clothing from getting caught in the chain while riding. Otherwise, you may fall off the bicycle.
CAUTION:
Be careful not to touch the teeth of the gears. There is a risk of injury.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

Variant Shimano Ultegra FC-R8100 HTII kľuky, 2x12, 52/36T
Kiváló!
Translate by GoogleShow the original