Marin Fairfax 3 28" bike, blue/orange
Choose in-person pick-up at the store and decide on the spot.
MARIN Fairfax 3 28" bicycle
The scratched model has a scratched derailleur.
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
Rigid fork
You will appreciate the lighter weight and stiffness, especially when riding on the road or bike path. Minimal service.
28” wheels
Often marked as 700c. They usually have a narrower profile, lower weight and high stiffness. They are the standard, especially for road (CX, gravel), trekking, city and cross-country bikes.
| Frame |
Series 3 Fitness, 6061 Aluminum, 700C Wheels, Relieved Tapered Head Tube and BB, Internal Cable Routing, Disc Specific Forged Dropouts, Fender, Rack, and Kickstand Mounts
|
| Fork |
Marin Full Carbon w/ Tapered Steerer, Fender Eyelets
|
| Shifting |
MicroSHIFT R9 2x9 Flat Bar Road Shifters
|
| Derailleur |
Shimano Sora
|
| Front derailleur |
MicroSHIFT R9
|
| Cassette |
Shimano, 9-Speed, 11-34T
|
| Chain |
KMC X9
|
| Crankset |
Forged Alloy, 48/32T Chainrings, Ring Guard
|
| Brakes |
Tektro HDM275 Hydraulic Disc, 160/160 mm Rotor
|
| Rims |
Marin Aluminum Double Wall, 19mm ID, 25mm Tall, Disc Specific
|
| Hubs |
Forged Aluminium Alloy, Disc, 32H
|
| Spokes |
14g Black Stainless Steel
|
| Tires |
Vee Tire, G-Sport, 700Cx35mm, Puncture Protection, Wire Bead
|
| Seat post |
Marin Alloy, 27.2 mm
|
| Saddle |
Marin Fitness Plush
|
| Stem |
Marine 3D Forged Alloy
|
| Handlebars |
Marin Alloy Flat
|
| Grips |
Marin Ergonomic Locking
|
| Headset |
FSA, No. 42/CB
|
| Bottom bracket |
Sealed Cartridge Bearings, Square Taper
|
| Pedals |
Commute Platform
|
| Sex | Men, Unisex |
| Model year | 2022 |
| Gears | 2x9 |
| Groupset | Shimano Sora, microSHIFT R9 |
| Size | M, L, XL |
| Colour | blue, orange |
| Material | aluminium |
| Wheel diameter | 28" |
| Brakes | Hydraulic disc |
| Fork | Rigid |
| product ID | 144922 |
MTB
| Size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
| Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
|---|---|---|---|---|---|---|
| Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
•
Ahojte, dajú sa prosím uchytiť dopredu aj dozadu nosiče na brašne?
Ak áno, prosím viete poslať aj link na konkrétny model.
Dikes
Mišo
•
Dobry den. dozadu mozete dat klasicky nosic na ram ako napr: https://www.mtbiker.sk/shop/prislusenstvo/nosice-a-kose/nosice/extend-rigid-basic-db-zadny-nosic-cierna-p320310.html
Vpredu mozete pouzit napr. https://www.mtbiker.sk/shop/prislusenstvo/nosice-a-kose/nosice/topeak-tetrarack-r1-predny-nosic-p309070.html
•
Hello, what is the weight of this bike please? Well thank you
Automatically translated
•
Dobrý deň, váha by mala byť okolo 12kg.
•
Does it have solid axles?
Automatically translated
•
Dobrý deň,
Sú tam klasické rychloupináky.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
Good customer experience.
Excellent first experience with MTBIKER, definitely not the last
Automatically translated