Vortex PIVOT torque wrench, 2-14 Nm
Vortex PIVOT torque wrench
Warning: Illustrative image.Torque wrench for tightening screws to the required torque. Each piece has been calibrated for accurate measurement, calibration certificate in the package. The wrench provides a very convenient adjustment of the required torque using a rotating plastic end with a safety lock. Thanks to the scale with divisions of 0.2 Nm, you always hit the required torque.
Warning: It is also possible to set it to a lower value, but at a value below 2 Nm the accuracy may no longer be 100%, or the manufacturer does not recommend turning the wrench this way.
|
Range of use 2 - 14 Nm
|
|
Head for socket wrenches 1/4"
|
|
Toggle ratchet for two-way use
|
|
10 mm long extension bit 1/4"
|
|
Ball lock for tight clamping of socket wrenches
|
|
Plastic handle for firm grip and comfortable handling
|
| Bits | Torx: T20 / T25 / T30 Hex: 3 / 4 / 5 / 6 / 8 / 10 mm |
| Material | chrome-vanadium steel (CR-V) |
| product ID | 139254 |
•
I have three questions:
1. what is the difference between this torque wrench and a similar (same?) Force brand ( https://www.mtbiker.sk/shop/servis/naradie/momentove-kluce/force-racna-momentova-14-2-14 -nm.html )? (the force also has a nice case (you don't have one on the side), the same attachments and according to the photo it looks exactly the same)
2. Does this wrench have a 1/4" end and can I also connect other attachments there (from another gola set) or only those that are included in the case?
3. Does this key "click" when the resistance/torque is applied?
•
edit
Dobry den,
napohlad vyzeraju kluce rovnako - zial odhadnut ci kalibracia/check sa robil taktiez rovnako si netrufam - ale s najvacsou pravdepodobnostou sa jedna o rovnaky produkt, akurat pod inym brandom, oba vyrobky maju samozrejme doklad o kalibracii.
Aj tento Vortex ma 1/4" hlavu (+ aj predlzovaci nadstavec) - ktora je teda univerzalna, standardom ju gulockova poistka. Pri dosiahnutom momente kluc klikne a rucka sa "zalomi".
•
edit
The key should be 2nm. But I know how to set the key to the 1.2 nm position (when I have the key set to 2 nm, it still spins to lava by 0.8 nm). Is it the fault of my piece or is it the same with other pieces? After use, should I set the product to 2nm or 1.2nm? the manual says that I should set it to the lowest value, which in my case is 1.2. After unpacking, the key was set to 2nm. I am attaching a photo with 2 nm and 1.2 nm.
Automatically translated
•
Dobry den,
situaciu uz preverujem s nasim dodavatelom/supportom Vortex. Akonahle budem mat blizsie info, tak Vas budeme kontaktovat. Dakujem!
•
Dobry den,
posielam slubovane info: skladovat treba na 2 Nm, rovnaka je aj spolahlivost merania, resp. kalibracny rozsah momentaku len po tuto hodnotu - ide nastavit aj na nizsiu hodnotu, tak ako pisete, avsak v tejto nizkej hladine pod 2 Nm uz nemusi byt presnost 100%-na, resp. nie je odporucane kluc takto pretacat.
•
Dobrý den.
Chtěl jsem objednat tento momentový klíč, ale nejde mi zaplatit přes online platbu. Je možné zaslat údaje o platbě na můj email?
[email protected]
Děkuji.
•
Dobrý deň,
máte možnosť platiť okamžitým prevodom alebo online kartou, prípadne dobírka.
Stačí si zvoliť platbu prevodom a potvrdenie Vám príde na účet. Môžete tak zaplatiť danú objednávku,
•
Hello, I have a question about this snapshot
does it also "moment" left-handed threads, or only right-handed? Thank you for your reply
•
Dobrý deň,
áno funguje pre obojsmerné použitie.
•
takze aj v certifikate je zapisane , ze bol odskusany aj pre lavotocive zavity?
•
Dobrý deň,
certifikát som vám poslal do správy.
•
Dobry den, poslite mi tiez ten certifikat. Potrebujem kluc s momentom na opacny zavit. Dakujem.
•
Dobry den,
certifikat z aktualne dostupnych kusov posielam do sukromnej spravy.
•
Hello,
can the given key be used, I mean that it torques both left-hand and right-hand threads or is it only in one direction?
•
Dobry den prajem,
áno, momentak funguje pre obojsmerné použitie.
•
How can I rate the product when my friend bought it in cash? But it goes to the complaint when tightening, the handle loosened, great that with guys for €500, it's a scumbag key! Buy rather with a steel handle and risks on it
Automatically translated
All the answers to questions about delivery, payment, security, returns, warranty and much else.
savings Shimano mineral oil for hydraulic brakes, 100 ml
8.99 €
savings
RRP 12.99 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
This is one of the best things I could have bought. I just had to cut about 4mm from the case with a very sharp knife in the part where the wheel on the wrench is used to adjust the desired torque, because the wheel was so pressed in the case, so the spring of the wheel was compressed. And be careful, this wrench does not click, but it breaks very gently in your hand when the desired torque is reached at lower torques, at higher torques it clicks nicely. It is a great helper and I can highly recommend this thing to everyone!!!
Automatically translatedFor such a low price, it's a pretty luxurious looking key, top notch packaging. There is also a calibration certificate attached, it's hard to say whether to believe it. But at least I know that until now I drove with a weakly tightened stem, and on the contrary, I had the fixed axles slightly "extended". Satisfaction.
Automatically translatedSo far so good, I haven't noticed any of the flaws described in the reviews below, the key doesn't click more noticeably but it "clicks" slightly and deflects in the direction of rotation without tightening, but if you know what to look for, it's not a problem, satisfaction
Automatically translated
Skvelý pomocník na bežný servis (keďže som puntickar a rád ďotahujem na hodnoty udávaná výrobcom). Verne slúži už 2 rok a spokojnosť. (Po úkone nezabudnite vrátiť momenťák na 0 hodnotu aby sa vám nerozkalibroval)
Translate by GoogleShow the original
Vyborna cena, vsetky potrebne momenty aj nastavce, navyse certifikat (pravda, tazko povedat, nakolko sa tomu da verit, ale snad ...). Dlho som zvazoval, pouzivam sice sporadicky, ale nelutujem, som spokojny
Translate by GoogleShow the original
Pre každého kto si udržuje bicykel sám, absolútna nutnosť, predovšetkým pokiaľ mám karbonový rám! Jednoduché nastavenie uťahovacieho momentu s aretáciou. Kvalitné prevedenie.
Translate by GoogleShow the original
Absolutna spokojnost, prevedenie na profi urovni, kalibrovane, na bezny servis myslim cenovo i kvalitou, uplne postacujuce-neni nutne dlho premyslat nad tym. 👌
Translate by GoogleShow the original
Bola to dobrá kúpa. Ešte si ho chcem overiť - porovnať s iným, certifikovaným momenťákom, aby som vedel, či je nejaká odchýlka pri uťahovaní.
Translate by GoogleShow the original
Kvalitný pomocník na domáci servis a aspoň vien že všetko je utiahnute na svoj moment a nielen tak od ruky za mňa spokojnosť a odporúčam 👍👍👍
Translate by GoogleShow the original
Zo skúsenosti iných, ktorí poškodili skrutky na biku som sa ponaučiť a kúpil som si tento kľúč. Kvalitne prevedenie a luxusne balenie.
Translate by GoogleShow the original
Na tento momentový kľúč nedám dopustiť. Maximálna spokojnosť a skutočne potrebný pre všetky typy bicyklov. najmä tie karbónove.
Translate by GoogleShow the original
The T30 head bit was missing but it was replaced after my feedback.
Translate by GoogleShow the originalOverall good product, good quality on reasonable price.
Šikovná vecička. Dnes, keď sa už nedoťahujú skrutky na fest, je to asi povinná výbava, aby nedošlo k poškodeniu komponentov.
Translate by GoogleShow the original
Použitý pár krát
Translate by GoogleShow the originalDá sa uzamknúť na konkrétnom momente
Myslím,že na domáce použitie super
Má certifikát o kalibracii
Krásne a prehľadne balenie s veľkým množstvom príslušenstva. Neviem či do profi servisu ale na doma slúži ako má.
Translate by GoogleShow the original
Šikovný pomocník hodí sa do každej "MTB dielne". Prevedenie vyzerá kvalitne a poteší aj kvalitné púzdro.
Translate by GoogleShow the original
Vyzera celkom funkcne aj manipulacia jednoducha. Klik pri dosiahnuti momentu je vyrazny a lahko rozpoznatelny.
Translate by GoogleShow the original
Spokojnosť, na domáci cykloservis postačujúce, na väčšie momenty je samozrejme potrebné kúpiť s iným rozsahom.
Translate by GoogleShow the original
Porovnavane v servise s ich momentom. Je to presne odporúčam. Ak máte doma karbónové bicykle super investicia
Translate by GoogleShow the original
Za mňa veľka spokojnosť. Zatiaľ ho používam krátko, ale robí čo má a má aj certifikát z merania presnosti.
Translate by GoogleShow the original