Newmen aero valve kit for Streem road wheels
• hidden aero valve, designed for NEWMEN Streem road rims/wheels
• compatible with NEWMEN Advanced SL R.38/R.42/R.50/R.65/R.80 road wheels
• the package contains: 1x hidden valve, 2x valve tightening nut, 2x plug for the valve hole in the rim, 1x extension adapter for blowing, 1x tool for tightening the nut, 2x reduction for a regular ball valve
Installation instructions: Follow the rim/wheel and tire manufacturer's instructions for installation.
1. Stick or attach tubeless tape to the rim. The tubeless rim tape must cover the entire base of the rim and should be applied with sufficient overlap.
2. Pierce the hole for the valve with a sharp object. Use only the NEWMEN STREEM Aero Tubeless Valve Kit to install the inner valve. Insert the tubeless valve into the valve hole. Make sure the internal valve is properly seated. Fasten the tubeless valve with a special nut. For this purpose, use the special screwdriver from the package
3. Now put the tire on one side of the rim.
4. Before putting the other side on the rim, pour sealant into the casing (opposite the valve). Fully stretch the other side of the tire onto the rim.
5. Inflate the tire until it sits correctly and evenly on the rim. Pay attention to the maximum permissible pressure of both the rim and the tire. The lower of these two values must always be used. When mounting the wheel for the first time, ideally use a compressor.
6. Shake and rotate the assembled wheel in all directions.
7. Initially, some air and sealant may escape. Repeat steps 5 and 6 if necessary.
8. Check that the tire is correctly seated on the rim.
product ID | 178988 |

There are currently no reviews