Newmen aero valve set for Streem road wheels, 80 mm
• hidden aero valve, designed for NEWMEN Streem road rims/wheels
• compatible with NEWMEN Advanced SL R.38/R.42/R.50/R.65/R.80 road wheels
The package contains:
1x hidden valve
2x valve tightening nut
2x valve hole plugs in the rim
1x extension adapter for blowing
1x nut tightening tool
2x reduction for regular tire valve
Installation instructions: When installing, also follow the instructions of the rim/wheel and tire manufacturers.
1. Stick or attach tubeless tape to the rim. The tubeless rim tape must cover the entire base of the rim and should be applied with sufficient overlap.
2. Pierce the valve hole with a sharp object. Use only the NEWMEN STREEM Aero tubeless valve kit to install the inner valve. Insert the tubeless valve into the valve hole. Make sure the inner valve is properly seated. Secure the tubeless valve using the special nut. For this purpose, use the special screwdriver from the package.
3. Now put the tire on one side of the rim.
4. Before putting the other side on the rim, pour sealant into the tire (opposite the valve). Pull the other side of the tire completely onto the rim.
5. Inflate the tire until it sits properly and evenly on the rim. Pay attention to the maximum permissible rim and tire pressure. The lower of these two values must always be used. Ideally, use a compressor when installing the wheel for the first time.
6. Shake the assembled wheel and rotate it in all directions.
7. Initially, some air and sealant may escape.
Repeat steps 5 and 6 if necessary. 8. Check that the tire is properly seated on the rim.
product ID | 329202 |

There are currently no reviews