Fenix ​​TK17 tactical rechargeable flashlight, 3600 lm, black

The powerful Fenix ​​TK17 tactical flashlight offers a peak luminous flux of up to 3600 lumens (ANSI) and a range of up to 330 meters. The flashlight is powered by one 21700 Li-ion battery with a capacity of 6000 mAh with a USB-C connector and a power bank function, thanks to which you can also charge your phone or other electronics in an emergency. The battery provides energy for up to 60 hours of lighting. The very solid and waterproof design makes this tactical flashlight ideal for harsh outdoor conditions, for professionals, armed forces and for hunting. The Fenix ​​TK17 LED flashlight uses a dual tactical switch, which allows for faster and more reliable control in crisis situations. For example, it can be quickly switched directly to strobe mode or to the highest power. The head of the lamp is equipped with a stainless steel impact rim, which is additionally equipped with three tungsten tips. Therefore, the flashlight can be effectively used to break glass in crisis situations or for self-defense.

All lamp parameters (luminous flux, battery operation time, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Parameters of the Fenix ​​TK17 LED flashlight

• A powerful CREE XHP50.3 HD LED with a lifespan of 50,000 hours is used.
• Five power modes: burst 3600 lumens (3 h 45 min) -> 1000 lumens (3 h 50 min) -> 350 lumens (8 hours) -> 30 lumens ( 60 hours ) -> strobe 3000 lumens (strobe flashing with variable frequency).
• Parabolic aluminum reflector for a perfect light cone with a range of 330 meters (27,300 cd).
• Burst mode endurance is the total time including reduced power after overheating protection is activated.
• The power supply is a 21700 6000 mAh Li-ion battery with a USB-C connector and power bank function (included in the package).
• Max. battery diameter 22.0 mm, max. Battery length 77.5 mm.
• Electronics with digital power regulation and protection against reverse battery insertion.
• System of two springs - high resistance of the lamp when used on a weapon.
• Intelligent protection against overheating.
• Dimensions 14.85 cm (length) x 3.6 cm (head diameter) x 2.54 cm (body diameter).
• Weight 197.2 grams including battery.
• Made of aircraft hardened aluminum type A6061-T6.
• Impact-resistant from a fall from a height of 1 meter.
• Trapezoidal threads highly resistant to wear.
• The lamp has a memory and will always turn on in the last set mode (does not apply to the strobe).
• Durable, hard-to-scratch surface - Type III hard anodized.
• Waterproof and dustproof according to the IP68 standard (tested under water at a depth of 2 meters for 30 minutes).
• Hardened ultra clear glass lens with anti-reflective coating.
• Dual tactical switch at the end of the lamp (momentary on/off function).
• Fixed clip for safe and easy carrying of the lamp (removable).
• Thanks to its design, the lamp does not slip in your hand and does not roll when placed.
• The flashlight comes with a Fenix ​​ARB-L21-6000B battery with a USB-C connector and power bank function, a USB-C/USB-C and USB-A/USB-C charging cable, a wrist strap, a belt holster, and a spare O-ring.
• Optional accessories include: Fenix ​​ALR-01 tactical ring, AER-05 and AER-04 cable switch (without strobe, maximum output is limited to 1200 lm), AOD-M white diffuser, AOT-04 white and red traffic cone.
• The following accessories are also compatible with the flashlight: M-LOK mount ALG-16, quick-release rail mount ALG-15, quick-release rail mount ALG-00, metal magnetic barrel mount, plastic magnetic barrel mount, flashlight mount on optics, metal optic mount, Fenix ​​ALD-05 strap for using the flashlight on a helmet, Fenix ​​bike mount, ALP-10L holster, ALP-20 holster.

Fenix ​​TK17 flashlight control

There may be an insulating cap on the battery inside the flashlight from the factory. Remove it from the battery before first use.

To turn on , press the larger tactical button located at the end of the flashlight, for instant activation, hold the button gently. By pressing the secondary toggle button, you can switch between power modes at any time during operation. To switch to flash mode, hold down the switch button for approximately 0.5 seconds while the light is on. Press and hold the toggle button to turn the light directly into strobe mode. BURST mode (3600 lumens) can also be directly activated at any time by holding down the main tactical button for 0.5 seconds.

Intelligent overheating protection - due to the fact that the lamp reaches a high output of 3600 lumens, its temperature increases. If the temperature exceeds 60°C, the power will be automatically reduced. As soon as the temperature drops below 60°C, the power will automatically increase again.

Battery charge indication - Turn on the flashlight with any button for less than one second (quick on->off), then the battery charge indication next to the switch will light up for 3 seconds. If the lamp remains on for a longer period of time, the indication will not be activated. If the indicator light is green, the battery is charged to more than 85%. Green flashing means 50-85% capacity. If it lights up red, it is charged to 25-50%. Blinking red means there is less than 25% battery capacity left.

Low battery warning - the flashlight will gradually automatically switch to the lowest power mode, and if it is already in the lowest mode, it will flash 3 times every five minutes.

Powerbank function

Plug the USB cable into the side USB-C connector and connect the USB device to be charged to the other end of the cable. The remaining battery capacity in power bank mode is indicated by three diodes around the plus pole:

• all indicator LEDs are off - 0% battery is discharged
• one blinks - remaining capacity 1-5%
• one lit - remaining capacity 5-33%
• two lights on - remaining capacity 33-66%
• three lights - 66-100%

Charging

• Remove the battery from the flashlight and connect the USB-C cable to the connector near the positive pole of the battery.
• During charging, three blue indicators on the battery will light up gradually. As soon as the three indicators remain lit continuously, the battery is fully charged.
• The charging time for a fully discharged battery is approximately 4 hours with a 5 V / 2 A USB adapter.

Warning

• Use only high-quality rechargeable batteries of the type 21700 with protective electronics.
• Do not shine the light on flammable objects from close proximity, as this may damage them or cause a fire due to the high temperature!
• When transporting or storing in a closed environment, remove the battery or loosen the terminal to prevent accidental activation.
• Keep this light out of the reach of children and do not shine it directly into anyone's eyes!
• Insert the battery with the positive pole facing the head of the lamp.
• If the protective rubber O-rings appear damaged after a long period of use, replace them. The rings must also be lubricated to prevent rubber erosion. By following these rules, the lamp will be properly protected against water.
• If the light is flashing, not switching to higher power modes, or not turning on, it could be for one of the following reasons:
  
  • The battery is discharged - charge it or replace it.
  • The contacts inside the lamp are dirty - clean them with a cotton swab dipped in alcohol.
  • The head, body or back of the lamp is loose, tighten them.

Power: 3600lm
Max. endurance: 60 hours
Range: 330m
Number of modes: 5
Weight: 197g
Power supply: 1x 21700
Light source: Cree XHP50.3 HD
Waterproof: IP68 (immersion 2 m)