Fenix ​​CL20R V2.0 rechargeable lamp, 300 lm, black

Are you looking for a reliable and versatile light for camping, tenting, fishing or evenings on the patio? You just found it. The Fenix ​​CL20R V2.0 is a compact and powerful rechargeable camping lantern that you can use to illuminate a room, tent, or workbench. Twenty-seven high-brightness diodes hidden under a hemispherical diffuser provide a luminous flux of up to 300 lumens (ANSI) with a pleasant neutral shade of white light (3700 - 4200 K). The advantage of this shade is a more natural and contrasting color rendering that does not tire the eyes. To create an atmosphere, the lantern is also equipped with twenty-four RGB diodes for colored lighting. Power is provided by a replaceable Fenix ​​ARB-LP1900 Li-ion battery with a capacity of 1900 mAh, which is conveniently recharged via a modern USB-C connector. In an emergency, it can be replaced with three regular AAA batteries. Thanks to the durable construction with IP65 protection, it won't be afraid of rain. The bottom is equipped with a hinged hanging eye and a strong neodymium magnet, so you can easily attach it to a tent structure, car hood or any iron surface. Weighing only 122 grams, it is the ideal outdoor light for traveling.

All lamp parameters (luminous flux, battery operation time, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix ​​CL20R V2.0 lantern parameters

• The light source is twenty-seven high-brightness 2835 LEDs with a neutral light shade and twenty-four 2020 RGB LEDs, all with a lifespan of 50,000 hours.
• Four power modes: 300 lumens (5.9 hours) -> 130 lumens (15 hours) -> 30 lumens (32 hours) -> 1 lumen (320 hours).
• Five red and RGB light modes: RGB with continuous shade selection 25 lumens (6.7 hours) -> RGB running 12 lumens (10 hours) -> RGB overflow 10 lumens (10 hours) -> red light 1.5 lumens (40 hours) -> red flashing 1.5 lumens (80 hours).
• Four modes of the light ring around the switch: red 1 lumen (/) – red flashing 1 lumen (/) – RGB running 1 lumen (/) – RGB overflow 1 lumen (/).
• Electronics with extended burn time function.
• The included Li-ion battery with a capacity of 1900 mAh is used for power supply , and it can be powered by 3x AAA batteries in an emergency.
• Charging via USB-C connector.
• Made of durable plastic, the lantern is shockproof to a drop from a height of 1.5 meters.
• Waterproof and dustproof according to IP65 standard (withstands heavy rain and splashing water).
• The diffuser creates a wide, uniform light cone with a diameter of 12 meters.
• The bottom is equipped with a hanging eyelet and a neodymium magnet for attaching to anything iron.
• Dimensions 8 cm x 4.8 cm x 5.4 cm.
• Weight 122 grams (including battery).
• The lantern comes with a USB-C charging cable, a Fenix ​​ARB-LP1900 battery, and a spare o-ring.
• It is possible to purchase a spare battery, a USB mains adapter and a USB car adapter.

Using Fenix ​​CL20R V2.0

There may be an insulating cap on the battery from the factory. Remove it before first use.

Turning on/off and switching power modes - The lantern turns on to white light by holding the switch for 0.5 seconds, to turn on color modes, press the switch twice quickly. To turn on the light ring, press the switch once and then again within 3 seconds. The individual lighting modes of the selected lighting method are switched by pressing the switch. The lantern turns off by holding the switch for 0.5 seconds.

Switching lighting modes - Delayed shutdown function: If the lantern is turned on in white light modes, press the switch twice quickly to activate the delayed shutdown function. The light ring on the switch will turn purple and the lantern will turn itself off after 20 minutes. If the lantern is switched to color lighting modes or has an active color ring, you can switch between these two lighting modes by double-pressing the switch. If the smooth color change mode is active, then double-pressing the switch will pause the current color or resume the smooth color change.

Memory for the last set mode - The lamp has a memory and will always turn on in the last set white light mode, except for the highest mode. Instead, it switches to the second highest mode.

Battery Replacement - Pull the hanging eyelet on the bottom of the lantern and unscrew it clockwise to open the battery cover. Insert the battery according to the marked polarity, and then screw the battery cover back on.

Charging - Flip up the dust cover and plug the USB-C charging cable into the charging port of the lamp. After charging is complete, seal the dust cap again. The normal charging time is 2.5 hours. The lantern can be used in all modes while charging. During charging, the light ring on the switch gradually flashes green in a counter-clockwise direction. It lights up green when fully charged. To extend battery life, we recommend charging the lantern when the charge level is between 50% and 25%. If the charge level drops below 25%, it is advisable to charge immediately. Do not connect the charging cable to the lantern if you are using AAA batteries.

Battery status indication - Every time the switch is turned on or pressed when the lantern is off, the battery status is displayed on the light ring of the switch for 3 seconds. If the ring is green, the battery is more than 85% charged. Green flashing means 50-85% capacity. If it lights up red, it is charged at 25-50%. Blinking red means less than 25% of battery capacity remains. This function is only active with the original Fenix ​​ARB-LP1900 battery.

Intelligent Overheating Protection - When using the lantern on high power mode for a long time, a large amount of heat accumulates. When it reaches a temperature of 50°C or higher, it automatically reduces the output by a few lumens to reduce the temperature. When the temperature drops below 50 °C, the power gradually increases again.

Low battery warning - If the battery voltage drops below the set level, the ring around the switch will flash red to remind you to recharge the battery.

Warning

• Do not disassemble the sealed parts yourself, this will void the warranty.
• Remove the battery to prevent accidental activation if the lantern is placed in a closed and flammable environment, such as pockets and backpacks!
• If the lantern is flickering, not switching to higher power modes, or not lighting up, it could be for one of the following reasons:
  
  • The battery is dead - charge it.

Warranty

Five-year warranty on the lantern, two years on the battery.

Output: 300lm
Max. endurance: 320 hours
Range: 12m
Number of modes: 13
Weight: 122g
Power supply: ARB-LP1900
Light source: SMD diodes
Waterproof: IP65 (rain)