Climbing Technology Alpine-Up belay set, Grey/Green
ALPINE UP is the most comprehensive and versatile belaying and rappelling device ever made. It was developed specifically for mountaineering and can be used with half, double and single ropes. It is easy to operate, intuitive and safe even in the event of an error. It is particularly advantageous that it enables self-locking rappelling and can be used in three different belay modes, depending on the terrain.
Parameters, certification and legislation
- For use with double or half dynamic ropes from 7.3-9.0mm in diameter.
- For use with a single dynamic rope with a diameter of 8.6-10.5 mm.
- Weight of the separate cooler: 175 g.
- The body of the isolator is hot-forged from light alloy.
- PATENTED.
- It is supplied (and must be used) together with the specific HMS carabiner CONCEPT SGL HC
- Meets EN 15151-2:2012 type 2
- UIAA
- Quality control 100%
- Made in Italy
Individual insurance modes
Belaying the first climber in CLICK UP mode (semi-automatic belay = braking with manual assistance):- It works on the principle of a semi-automatic CLICK UP belay, but it can be used both with a single rope and with twin or half ropes. It works without the need to operate any lever or moving parts and allows a fall to be arrested simply by holding the free end(s) of the rope in your hand.
- Suitable for belaying first-time climbers in multi-length sports routes, secured with rivets.
- Suitable for securing directly through the securing eye of the seat or directly into the stand.
- It allows the belayer to easily lower the co-climber to the ground - just apply moderate pressure from the top of the belayer while keeping the free end of the rope under control.
- Safe even if the ropes are inserted the other way round! In this case, the ALPINE UP does not work as a semi-automatic safety device, but as a classic safety bucket, thanks to the V-shaped grooves to increase the braking effect.
- In this mode, it functions as a self-locking rappelling device. To abseil, it is necessary to release the plastic lever and press it with the palm of your hand so that the blocked rope can slide. With the other hand, you can then regulate the abseiling speed as with other types of abseiling devices. When you let go of the rope, the ALPINE UP automatically locks and you stay hanging. This solution replaces safety pins, which are necessary in the case of roping on another belaying device.
- It works on the principle of a classic bucket, suitable for dynamic fall capture.
- After the fall of the first climber, the belay is not blocked and the belay can reduce the severity of the caught fall by slipping the rope.
- Suitable for belaying first climbers in traditional multi-length routes when we use friends, staples, lenses as progressive belay and when automatic fall blocking is not suitable.
- Braking of the rope slipping during a fall is ensured by the friction of the rope in the "V"-shaped grooves, just like with a classic bucket.
- It allows the first climber to start, or abseil, just like with a classic bucket.
- Independent and self-locking belay of one or two co-climbers.
- The possibility of gradual release of the rope/lowering of the co-climber even under load, by placing an additional carabiner in the corresponding hole and lifting the lower side of the belay.
To be used exclusively with the HMS carabiner CONCEPT SGL HC
The ALPINE UP is supplied and must be used together with the specific HMS carabiner CONCEPT SGL HC with wear-resistant anodizing and the ACL system (steel feather preventing the carabiner from turning over), which prevents the possibility of the carabiner turning and possible overloading of its secondary axis.Features of the carabiner:
- Prominent double T profile for excellent weight/strength ratio
- Lightened and shaped for a better grip.
- The nose of the carabiner does not have a beak so that it does not catch when it is clicked in and out.
- The ACL system - a steel feather that allows the carabiner to be attached to the securing eye of the seat, which fixes its position and thus prevents cross-overloading of the carabiner.
- Longitudinal load capacity (main axis): 23 kN
- Lateral load capacity (secondary axis): 10 kN
- Longitudinal load capacity when the lock is open: 7 kN
- Weight: 77 g
- Size: 105x73 mm
- Lock clearance: 21 mm
- ACL
- EN 12275:2013-H
- EN 362:2004-A/T
- CE 0333
- UIAA
- Individually tested 100%
- Made in Italy
Type of water heater: semi-automatic
Possibility of using two ropes: Yes
Guide Mode: Yes
For half rope diameters: 7.3–9.0
For single rope diameters: 8.6-10.5
For double rope diameters: 7.3–9.0
The package includes: a safety card
Certification: EN 15151-2:2012 type-2
Gender: Unisex
Product details
Sport | alpinism, climbing, via ferrata |
product ID | 249826 |
Rating 0/5
Similar products
You can try these searches
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews