Fenix ​​​​PD35R ACE + pendant CL01

A discounted limited set of the Fenix ​​PD35R ACE flashlight and the Fenix ​​CL01 attachable mini lantern.

The high-performance Fenix ​​PD35R ACE flashlight will dazzle you with a luminous flux of up to 2000 lumens (ANSI) and a range of up to 380 meters. This great light output is provided by the premium Luminus SFT-40 LED. It is powered by a 18650 Li-ion battery with a capacity of 4000 mAh (found in the package), which can be conveniently recharged directly in the flashlight via a modern USB-C connector. Under the durable screw nut that protects the USB-C charging port, there is also a unique SET programming button. With it, you can customize the flashlight in a flash: choose one of three preset profiles – tactical, service or outdoor – and perfectly adjust the number of modes, exactly according to your needs. The Fenix ​​PD35R ACE offers up to seven different lighting modes, so you can always choose the optimal combination of power and endurance. It can achieve an incredible 30 days of continuous lighting on a single charge in eco mode! For crisis situations, the SOS and strobe flash modes are invaluable. Thanks to digital regulation, the flashlight provides constant light output even when the battery gradually discharges, the status of which can be easily checked using the charge indicator. The PD35R ACE impresses not only with its compact dimensions and impressive performance, but also with its tactical limit switch and the ability to connect the Fenix ​​AER-02 wired switch. It is therefore an ideal choice not only for all outdoor enthusiasts, but will also be of great use to members of the military, security forces, or hunters.

All flashlight parameters (luminous flux, battery operating time, waterproofness, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix ​​PD35R ACE flashlight parameters

• The high-performance Luminus SFT-40 LED with a lifespan of 50,000 hours is used.
• Seven lighting modes: Turbo 2000 lumens (2 h 50 min) - 1000 lumens (3 h 20 min) - 350 lumens (7 h 16 min) - 50 lumens (45 h 24 min) - 1 lumen ( 720 hours ) - Strobe (2000 lumens) - SOS (50 lumens).
• Luminous flux and runtimes are measured with a rechargeable Fenix ​​18650 Li-ion battery with a capacity of 4000mAh ( included ).
• Programmable - choose from three preset profiles - tactical, service or outdoor.
• Digitally regulated for constant brightness, intelligent protection against overheating.
• Power supply: one 18650 Li-ion battery or two disposable CR123A batteries (max. output will be limited to 1000 lumens)
• Max. battery diameter 18.7 mm, max. Battery length 72.5 mm.
• Smooth parabolic reflector for a light cone with a reach of 380 meters (33872 cd).
• The flashlight has a memory and always turns on in the last mode set (does not apply to the strobe).
• The LED indicator in the side button always displays the battery charge status when the flashlight is turned on (calibrated for use with 18650 Li-ion batteries).
• Trapezoidal threads with increased wear resistance.
• Dimensions 14.05 cm (length) x 2.36 cm (body diameter) x 2.65 cm (head).
• Weight 145 grams (including battery).
• Made of aviation hardened aluminum, durable surface - Type III hard anodized.
• Impact resistant to a fall from a height of 1 meter.
• Pronounced grooved surface for better grip, the design prevents the flashlight from rotating on an uneven surface.
• Waterproof and dustproof according to the IP68 standard (tested under water at a depth of 2 meters for 30 minutes).
• Removable steel buckle.
• Hardened ultra clear glass lens with anti-reflective coating.
• Tactical switch at the end of the flashlight (momentary on/off function).
• The flashlight comes with a wrist strap, CL01, belt holster, spare o-rings, Fenix ​​18650 4000 mAh battery, and USB-C charging cable.
• As optional accessories, you can purchase, for example: Fenix ​​AER-02 cable switch, AOT-S+ red traffic cone, AOD-S diffuser, AOF-S+ V2.0 red filter, Fenix ​​ALD-05 strap for using the flashlight on a helmet, Fenix ​​ALB-10 bicycle holder or BikeBlock flashlight holder for a cycling helmet, Fenix ​​ALG-00 quick-release mount, ALG-15 quick-release rail mount, metal magnetic mount, ALP-10S case, Fenix ​​ALG-16 M-LOK mount.

The use

There may be an insulating cap inside the flashlight battery from the factory. Before first use , remove it from the battery.

To turn on, press the tactical switch at the end of the flashlight, for instant activation, press it only halfway. By pressing the side button near the flashlight head, you can cycle between constant light modes at any time during operation. To switch to strobe, hold the side button for approximately 0.5 seconds. Pressing it again will turn on SOS. Holding the side button again will return to the constant lighting modes. The number of modes that can be switched depends on the mode preset you have selected, for example, the strobe can be completely deactivated (see below).

Setting lighting mode presets - The SET function offers a choice of three lighting mode presets, which are listed in the following table.

1. Loosen the nut under the flashlight head to reveal the hidden SET switch.

2. With the light on, press the SET switch to switch between: Setting 1 - tactical mode (Turbo mode only) → Setting 2 - service mode (3 modes) → Setting 3 - outdoor activities (5 modes). When the flashlight is first turned on, Setting 3 is selected at the factory.

3. After selecting the desired preset, the corresponding indicator next to the SET button will light up green for 3 seconds to confirm the selection. This indication also indicates the current number of available modes for the given Setting.

Note:

1. Users can independently enable or disable the strobe option. By default, it is enabled in all presets.

2. The number of modes for each lighting preset is listed without Strobe and SOS.

Strobe Mode Activation and Deactivation - With the light on, hold the hidden SET switch for 1.2 seconds to activate/deactivate Strobe mode in all mode presets. The flashlight will blink twice to confirm the selection. 

Memory for the last set power mode - The flashlight remembers the last used power mode within the active preset. The next time it is turned on, it will activate in this mode (does not apply to Strobe and SOS).

Battery replacement - Unscrew the battery terminal and insert the battery with the positive pole facing the reflector. Then fully tighten the end cap again. 

Charging

1. Unscrew the protective nut under the flashlight head to reveal the charging port and plug the USB-C charging cable into the charging port. Tighten the nut again after charging is complete.

2. The indicator in the side button lights up red while charging, and turns green when fully charged. While charging, the flashlight can be turned on and off by holding the side switch. The limit switch does not work during charging.

3. The typical charging time for a fully discharged ARB-L18-4000 battery is approximately 3 hours using a 5V/3A USB power supply. 

Battery charge status indication - Each time you turn it on, the indicator LED in the side button is activated for three seconds. If the indicator light is green, the battery is more than 85% charged. Green flashing means 50-85% capacity. If it lights up red, it indicates 25-50%. Blinking red means there is less than 25% battery capacity left. Note: Only works with Fenix ​​18650 batteries.

Intelligent overheating protection - If the battery temperature exceeds 60°C, the power will be automatically reduced. As soon as the temperature drops below 60°C, the power will gradually increase again.

Low battery warning - If the voltage drops below the set level, the flashlight will reduce the brightness to a lower level. When the lowest power level is reached, the battery charge indicator will flash red to remind you to recharge or replace the battery.

Warning

• Do not disassemble the sealed parts in the flashlight head yourself, as this will void the warranty.
• Keep the flashlight out of reach of children!
• Do not shine the flashlight directly into your own or anyone else's eyes!
• Loosen the cap half a turn or remove the batteries to prevent accidental activation during storage or transport.
• Use only original protected 18650 Li-ion battery or 3V CR123A batteries to avoid damaging the flashlight.
• If the protective rubber rings appear damaged after a long period of use, replace them. The rings also need to be lubricated to prevent rubber erosion. By following these rules, the flashlight will be properly protected against water.
• If the flashlight is blinking, not switching to higher modes, or not turning on, it could be one of the following reasons:
  
  • The batteries are almost empty – charge or replace the battery.
  • The contacts inside the flashlight are dirty - clean them with a cotton swab dipped in alcohol.
  • The head, body, or back of the flashlight is loose - add lubricant to the sealing rings and tighten both the head and the end of the flashlight firmly.

Warranty

Five-year warranty on the lamp, two years on the battery and two years on the CL01.

Power: 2000lm
Max. endurance: 700 hours
Aftersight: 380m
Number of modes: 7
Weight: 145g
Power supply: 1x 18650
Power supply: 2x CR123A
Light source: Luminus SFT-40
Waterproof: IP68 (immersion 2 m)