Fenix ​​LR35R PRO rechargeable flashlight, 10000 lm, black

The Fenix ​​LR35R PRO is an extremely powerful and versatile flashlight designed for exceptional performance in any situation. It provides a dazzling light output of up to 10,000 lumens and a maximum range of 500 meters. For maximum versatility, it combines several specialized light sources: a long-range spotlight with a power of 5000 lumens, a wide spotlight with a power of 8000 lumens, a red light (260 lm) and a powerful 3.7 W UV light.

Control is fast and intuitive thanks to the combination of a rotary control for smooth brightness control and an electronic switch for switching modes. Power is provided by two high-capacity 21700 Li-ion batteries with a capacity of 6000 mAh (included), which provide up to 135 hours of battery life. Thanks to the bidirectional USB-C port with 18W fast charging support, the lamp can not only be quickly recharged, but also used as a power bank for your other devices, such as a smartphone.

Operational safety is ensured by intelligent overheating protection, which automatically reduces power at high temperatures. The stainless steel impact rim is fitted with tungsten steel spikes, which allow for lightning-fast glass breakage in emergency situations. Of course, there is a locking function to prevent accidental switching on. The lamp is designed to withstand even the most demanding conditions - it is fully dustproof and waterproof according to the IP68 standard and shockproof from a drop of 1 meter. It is therefore an ideal companion for search and rescue operations, outdoor adventures and professional deployment.

All lamp parameters (luminous flux, battery operation time, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix ​​LR35R PRO flashlight parameters

• Eight premium Luminus SST-25 LEDs, four SFT-25, two OSRAM GR QSSPA1.23 and one UV Luminus SST-10 are used, all with a lifespan of 50,000 hours.
• Continuously adjustable white light output:
  
  • Long-range and wide spotlight: continuously adjustable output from 10,000 lumens to 80 lumens with a runtime of 2.6 - 61 hours.
  • Remote spotlight: continuously adjustable output from 5000 to 30 lumens with a runtime of 2.7 - 135 hours.
  • Wide spotlight: continuously adjustable output from 8000 to 50 lumens with a runtime of 2.7 - 103 hours.
  • Two flash modes (without continuous regulation): strobe 10000 lumens (/) and SOS 30 lumens (270 hours).
• Continuously adjustable red light in the range of 260 to 10 lumens with a runtime of 6.8 - 290 hours and a flashing function in the range of 260 lumens - 10 lumens.
• UV light 365 nm: 3700 mW luminous flux (20 hours) for large-area and accurate UV detection.
• Battery life is measured with the included batteries.
• The flashlight is powered by two 21700 Li-ion batteries with a capacity of 6000 mAh (Fenix ​​ARB-L21-6000), which are included in the package.
• Max. battery diameter 22.3 mm, max. Battery length 77.0 mm.
• The lamp can be powered by just one battery, but the wide reflector will have half the power.
• The power in the highest modes is regulated by overheating protection.
• The batteries can be recharged via a fast waterproof USB-C connector directly in the lamp.
• Charging time with a powerful (at least 27W) USB source is approximately 4 hours. With weaker resources it may be longer.
• Battery charge status indication.
• A long-range spotlight with a range of up to 500 meters (62,260 cd) and a continuous wide cone with a range of up to 213 meters (11,333 cd) or a combination of both with a range of 445 meters (48,844 cd).
• Digitally regulated for constant brightness.
• Intelligent protection against overheating.
• Intelligent proximity sensor.
• The lamp automatically remembers the last selected lighting mode.
• Protection against accidental insertion of batteries in the opposite direction (reverse polarity).
• Solid metal buckle.
• Made of aircraft hardened aluminum. Trapezoidal threads highly resistant to wear.
• Durable, hard-to-scratch surface - Type III hard anodized.
• Impact resistant to a drop from a height of 1 meter.
• Waterproof and dustproof according to the IP68 standard (tested under water at a depth of 2 meters for 30 minutes).
• Dimensions 14.3 cm (length) x 5.5 cm (head diameter).
• Weight 457 grams including batteries.
• Hardened ultra clear glass lens with anti-reflective coating.
• The flashlight comes with a hand strap, case, spare o-ring, 2x Fenix ​​ARB-L21-6000 batteries, and a USB-C charging cable.
• The lamp can also be purchased with a USB power adapter, a USB car adapter, and a USB adapter supporting fast charging.

Using the Fenix ​​LR35R PRO flashlight

On/Off - When the light is locked, turn the switch clockwise to turn it on to white light. To turn off and lock, turn the rotary switch counterclockwise until it stops. With the lamp off or locked, press the electronic switch twice quickly to turn on the colored light. When the light is unlocked, press and hold the electronic switch for 0.5 seconds to turn it on/off.

Switching modes - When the lamp is on, you can switch between white light modes by pressing the electronic switch: Long-range spotlight → Wide-range spotlight → Long-range + Wide-range spotlight combination. With the colored light on, pressing the switch switches between Red Light → Red Flash → UV Light modes. With the flashlight unlocked, press and hold the electronic switch for 1.2 seconds to switch to flash modes. You can then switch between strobe and SOS by pressing the switch individually. Holding the electronic switch again will switch back to the last constant lighting mode.

Continuous power regulation - In white, red and UV light modes, the power can be continuously regulated using the rotary switch. Turning clockwise increases the power, turning counterclockwise decreases it.

Lock/Unlock - To lock the light, turn the rotary switch counterclockwise until it stops. To unlock and turn on the light, turn the rotary switch clockwise.

Memory for the last set mode - The lamp automatically remembers the last selected lighting mode. When turned back on by turning the rotary switch or holding the electronic switch, the previously used white light mode will be restored. When turned on again by double-pressing the electronic switch, the previously used colored light mode will be restored. The lamp does not remember the previously used power level.

Replacing the batteries - Unscrew the lamp body and insert both batteries with the positive pole facing the reflector. Then tighten the body completely again. The flashlight can also be used with one battery inserted, but its performance will be reduced.

Charging - Turn off the light, flip off the dust cover and plug the USB-C charging cable into the light's charging port. After charging is complete, seal the dust cap again. During charging, five green indicator lights flash from left to right to indicate the charging status. The typical charging time for the included ARB-L21-6000 batteries is 4 hours using a 27 W power supply. It is prohibited to charge the flashlight without batteries inside.

Power bank function - Flip up the dust cover and plug the USB-C charging cable into the charging port of the lamp and connect the other end of the cable to the device you want to charge. After discharging is complete, replace the dust cap. During discharge, five green indicator lights flash from right to left to indicate the discharge status.

Note: The flashlight can be used while charging or discharging, but the maximum available output is limited to 200 to 900 lumens depending on the current charge level and the mode used.

Battery charge status indication - After turning on the lamp or pressing the switch when the lamp is off, the indicator lights above the electronic switch will light up for three seconds. If five lights are on, the batteries are more than 80% charged. Four lights indicate 60-80% capacity, three lights 40-60%, two lights 20-40%, one light 1-20%.

Low battery warning - If the battery voltage drops below the set level, the flashlight will reduce the brightness to a lower level. When the lowest power is reached, the battery charge indicator will start flashing to remind you to recharge or replace the batteries.

Intelligent proximity sensor - The lamp has a built-in safety circuit. When the spotlight approaches the illuminated object less than 6 cm for more than 1.5 seconds, it automatically reduces the output to 50 lumens to prevent damage to the object from strong light and glare from reflected light. After a delay, the original power is automatically restored.

• Turning the proximity sensor on/off - To turn the function off, lock the lamp and hold the electronic switch for 6 seconds. The lamp indicates the function is turned off with six flashes at 50 lumens. The function is reactivated by holding the switch for 6 seconds with the lamp locked. The flashlight indicates that the function is on with two flashes at 50 lumens.

Note:

• After changing the current mode, it takes approximately 1 second for the light to recalculate the remaining operating time. During this time, 'CHECK' will be displayed on the OLED display.
• If the battery level is 5% or lower, an empty battery icon will appear on the display. In this state, only the low wide spotlight mode can be used.
• After replacing the batteries, it takes 5 to 8 seconds to re-read the remaining operating time, the display will show 'LOADING' and the light cannot be used during the re-reading.

Intelligent overheating protection - When using the lamp at high power modes for a long time, a large amount of heat accumulates. When the lamp reaches a temperature of 55°C or higher, it will automatically reduce the output by a few lumens to reduce the temperature. When the temperature drops below 55 °C, the power gradually increases again.

Warning

• Keep this lamp out of reach of children!
• Do not shine the flashlight directly into anyone's eyes!
• Do not shine the light on flammable objects in the immediate vicinity to avoid damaging them or creating a hazard due to high temperature!
• DO NOT use the lamp in an inappropriate manner, e.g. by biting in the mouth to avoid personal injury or danger to life in the event of a lamp or battery failure!
• This lamp accumulates a large amount of heat during high mode operation, resulting in a high surface temperature. Please use it safely to avoid burns.
• Turn off and lock the flashlight to prevent accidental activation if the flashlight is placed in a closed and flammable environment, such as pockets and backpacks!
• Do not disassemble the sealed parts of the lamp yourself, this will void the warranty.
• Never use different discharged batteries or batteries with different capacities.
• Use only high-current 21700 type Li-ion batteries with protective electronics, otherwise the flashlight may not function properly.
• If the protective rubber rings appear damaged after a long period of use, replace them. The rings also need to be lubricated to prevent rubber erosion. By following these rules, the lamp will be properly protected against water.
• If the light is flashing, not switching to higher power modes, or not turning on, it could be for one of the following reasons:
  
  • The batteries are almost dead – replace or charge them.
  • The contacts inside the lamp are dirty - clean them with a cotton swab dipped in alcohol.
  • The lamp body is loose - add lubricant to the o-rings and tighten.

Power: 10000lm
Max. endurance: 135 hours
Aftersight: 500m
Weight: 457g
Number of modes: 100
Power supply: 2x 21700
Light source: OSRAM GR QSSPA1.23
Light source: Luminus SST-25
Waterproof: IP68 (immersion 2 m)