Fenix ​​WF30RE rechargeable flashlight, 300 lm, black

The Fenix ​​WF30RE professional rechargeable flashlight is equipped with ATEX/IECex certification for use in explosive environments. The flashlight is powered by a specially modified Li-ion battery ARB-L21-3000Ex with a capacity of 3000 mAh and provides a luminous flux of up to 300 lumens with a range of 149 meters. The battery is charged directly in the lamp via a USB-C connector. The lamp body is made of aircraft aluminum with high durability and impact resistance. The lamp is designed specifically for firefighters and rescue workers, and is also suitable as a work lamp for industrial operations with the possibility of explosive dusts and gases. These include, for example, chemical plants, refineries, textile factories, paper mills, mills, metallurgical plants, power plants and other operations.

Certificates:

• Usable in zones 1-2 of explosive gases and zones 21-22 of explosive dust.
• Full text of certificates:
• IECEx: IECEx TUR 18.0042X:
  
  • Ex ib IIC T4 Gb
  • Ex ib IIIC T130°C Db
• ATEX: TÜV 18 ATEX 8252X:
  
  • II 2G Ex ib IIC T4 Gb
  • II 2D Ex ib IIIC T130°C Db
• The luminaire also holds CSA, NEPSI and GRGT certificates.

Parameters of the ATEX work lamp WF30RE:

• A powerful Cree XP-G3 LED with a neutral light shade and a lifespan of 50,000 hours is used.
• Five power modes: 300 lumens (7.3 hours) -> 100 lumens (22.8 hours) -> 30 lumens (68 hours) -> 5 lumens ( 313.3 hours ) -> SOS (30 lumens).
• It uses a special Fenix ​​ARB-L21-3000Ex Li-ion battery with a capacity of 3000 mAh. This is a modified type certified for explosive environments.
• The battery is recharged directly in the lamp via a modern USB-C connector.
• The electronics are equipped with a protective function against excessive battery discharge; when the voltage drops below a certain limit, it automatically switches to a lower power mode.
• The flashlight has a memory and can be turned on in the last set mode, except for emergency modes (Eco and SOS).
• Indication of the state of charge of the accumulator.
• Made from aircraft hardened A6061-T6 aluminum.
• Durable, scratch-resistant surface – Type III hard anodized.
• Impact resistant to a drop from a height of 1 meter.
• Waterproof and dustproof according to the IP68 standard (tested under water at a depth of 2 meters for 30 minutes).
• Textured aluminum reflector for a perfect light cone with a range of 149 meters (5572 cd).
• Dimensions 15.17 cm (length) x 3.4 cm (head diameter) x 2.8 cm (body diameter).
• Weight 218 grams (including battery).
• The package includes: Fenix ​​WF30RE flashlight, Fenix ​​ARB-L21-3000Ex battery, USB charging adapter, USB-C charging cable, EU Declaration of Conformity, replacement O-ring, hand strap, user manual, warranty card.
• The lamp can be purchased with the Fenix ​​ALD-05 strap for using the lamp on a helmet.

Control:

With the light off , press and hold the switch for 0.5 seconds to switch to the last used general power mode (General mode). With the light off, press the switch twice quickly to turn on the 5 lumen emergency mode (Extreme mode). You can switch power modes at any time during operation by pressing the side button within the selected mode group. With the light on, press and hold the switch for 0.5 seconds to turn it off.

Battery charge status indication – press the flashlight button (when the flashlight is off). If the indicator light is green, the battery is more than 85% charged. Green flashing means 50-85% capacity. If it is red, it is 25-50% charged. Blinking red means less than 25% of battery capacity remains.

Low battery warning - the flashlight will gradually automatically switch to the lowest mode and the indicator in the button will start flashing red.

Charging - Flip open the dust cover and plug the USB-C charging cable into the charging port. After charging is complete, replace the dust cap. The indicator in the button lights red during charging. It will turn green when fully charged. Do not charge the flashlight in an explosive environment. When charging, use the included USB charging adapter to ensure safety.

To replace the battery, unscrew the lamp end using an 8 mm Allen key. Never replace the battery in an explosive environment.

Warning

• Perform all service work, charging and battery replacement outside of an explosive environment!
• Use only a manufacturer-certified Fenix ​​battery.
• If the sealing rubber ring on the thread of the lamp cap becomes damaged, replace it with the spare one from the lamp packaging.
• If the light is flashing, not switching to higher power modes, or not turning on, it could be for one of the following reasons:
  
  • The battery is discharged, charge or replace it.

Warranty

Five-year warranty for the lamp, two-year warranty for the battery.

Range: 149m
Max. endurance: 313.3 hours
Output: 300lm
Weight: 218g
Number of modes: 5
Power supply: 1x ARB-L21-3000Ex
Light source: Cree XP-G3
Waterproof: IP68 (immersion 2 m)