Fenix ​​WF25RM rechargeable flashlight, 3000 lm, black

The Fenix ​​WF25RM is a professional duty flashlight that offers exceptional technical parameters for demanding users. It combines reliability, high performance and multi-purpose use. It is equipped with white light with a short-term output of up to 3000 lumens and 365 nm ultraviolet light with a power of up to 500 mW. Ultraviolet light allows, for example, a quick check of the authenticity of documents and banknotes or a check for liquid leaks. Power is provided by a 21700 Li-ion battery with a capacity of 5000 mAh, which is charged directly in the flashlight using the included cradle with USB cable. The lamp simply snaps into the cradle when charging. The cradle is equipped with mounting holes, so it can be screwed to a wall or table, for example. The charging cable can be disconnected from the cradle and the lamp can be charged outside of it. The battery is also equipped with a USB-C charging connector, so the lamp can be easily charged even without a charging cradle.

The Fenix ​​WF25RM has a total of five white light modes with a duration of up to 77 hours and one UV light mode. It uses a button ergonomically placed on the side for control. The end is equipped with an integrated carabiner for hanging. The lamp has a built-in safety circuit. When turned on in the two highest white light modes and the spotlight comes closer to the illuminated object to less than 1 cm, it will automatically reduce the power to low mode to prevent possible damage.

Excellent technical parameters, waterproof and shockproof design make this lamp suitable for use in harsh outdoor conditions. It will be appreciated by police officers, firefighters, rescuers and mountain rescuers in particular when performing their duties. It will certainly be popular with repairmen and technicians, security agency workers, and building guards.

All lamp parameters (luminous flux, battery operation time, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard. 

Fenix ​​WF25RM flashlight parameters

• It uses a premium white LED Luminus SST-70 and a 365 nm UV LED with a lifespan of 50,000 hours.
• Five white light output modes: BURST 3000 lumens (while the button is held) -> 1000 lumens (3.1 hours) -> 400 lumens (7.5 hours) -> 150 lumens (22.3 hours) -> 30 lumens (77 hours).
• One UV light mode: 500 mW with a wavelength of 365 nm (the manufacturer does not specify the lighting time).
• Luminous flux and runtimes are measured with the included USB-C Li-ion 21700 battery with a capacity of 5000 mAh.
• Max. battery diameter 22.0 mm, max. Battery length 77.0 mm.
• Electronics with digital constant regulation and intelligent overheating protection.
• Made from hardened 6061-T6 aircraft aluminum, the light is shockproof to withstand a drop from a height of 1 meter.
• Protection against accidentally inserting the battery upside down (reverse polarity).
• Durable surface - Type III hard anodized.
• Indication of the state of charge of the accumulator.
• Integrated carabiner for hanging.
• Charging cradle with magnetic charging, the cradle is powered by a USB cable with a magnetic end (USB power supply not included).
• The cable can be disconnected and the lamp can be charged outside the cradle.
• The lamp has a memory and always turns on in the last set mode (except the highest mode).
• Waterproof and dustproof according to the IP68 standard (tested under water at a depth of 2 meters for 4 hours)
• The reflector creates a well-focused light cone with a range of 370 meters (34,225 cd).
• Lamp dimensions: 18.2 cm (length) x 4 cm (reflector diameter).
• Weight 250 grams with battery.
• The flashlight comes with a Fenix ​​ARB-L21-5000U battery, a charging cradle with a USB charging cable, and a spare O-ring.
• As optional original accessories, you can purchase an AOT-04 traffic cone, a Fenix ​​ALD-05 strap for using the light on a helmet, a Fenix ​​bicycle holder, a USB power adapter and a USB car adapter.

Using the Fenix ​​WF25RM flashlight

From the factory, there may be an insulating cap inside the lamp on the battery. Remove it before first use.

To turn on/off, press the button located on the side of the lamp for about 0.5 seconds. With short button presses, you can switch between 30 - 150 - 400 - 1000 lumen power modes at any time during operation. The highest BURST mode of 3000 lumens can be activated by holding the button for 1.2 seconds. After releasing it, the light switches back to the mode from which you started the highest power. You can activate the UV light from off by double-clicking.

UV light on indication - when the UV light is on, the indicator in the side button flashes alternately red and green, as a warning that the invisible ultraviolet light is active. If the battery is almost empty, the indicator only flashes red.

Intelligent proximity sensor - the lamp has a built-in safety circuit. When turned on to the two highest white light modes and the spotlight comes closer to the illuminated object to less than 1 cm, it will automatically reduce the power to low mode to prevent damage to the object from strong light and glare from reflected light. The function is not active for UV light.

Turning the proximity sensor on/off - to turn off the function, loosen the battery cover of the flashlight, then press the side button and tighten the end cap again. The lamp indicates the function is turned off with three flashes. This function is automatically reactivated by replacing the battery.

Charging - snap the light with the charging connector towards the inside of the cradle. Alternatively, if the charging cable is disconnected from the cradle, attach the magnetic connector of the charging cable to the connector on the lamp. Plug the other end of the cable into your computer, or a USB adapter for power or car use. The side indicator lights up red while charging. It lights up green when fully charged. Charging a fully discharged battery takes approximately 2 hours and 45 minutes using a 3A power supply. The lamp cannot be used while charging. The battery can also be charged outside the flashlight using the integrated USB-C connector - plug the USB-C cable into the side connector next to the positive pole; during charging, the indicator light in the positive pole of the battery lights up red. When fully charged, it lights up blue or green.

Intelligent overheating protection - due to the high power of the lamp, its temperature increases. If the temperature of the lamp exceeds 60 °C, the power will be automatically reduced. Once the temperature drops below 60°C, the power will gradually increase again.

Battery charge status indication - the flashlight always indicates the battery charge status three seconds after switching on. Green indicates sufficient charge (100% - 85%), flashing green 85% - 50%, solid red 50% - 25%, and flashing red indicates a critically low battery (25% - 1%). If the battery is discharged, the lamp will gradually automatically switch to lower power modes. When the lowest power is reached, the battery status indicator will start flashing red to remind you to recharge or replace the battery.

Warning

• Do not disassemble the sealed part in the lamp head yourself, this will void the warranty.
• Use only high-quality 21700 Li-ion batteries with protective electronics.
• If the protective rubber rings appear damaged after a long period of use, replace them.
• If the lamp flashes, does not switch to higher power, or does not light up, it may be for one of the following reasons:
  
  • The battery is dead, charge it.
  • The contacts inside the lamp are dirty - clean them with a cotton swab dipped in alcohol.
  • The end of the lamp is loose, tighten it.

Output: 3000lm
Max. endurance: 77 hours
Range: 370m
Number of modes: 6
Weight: 250g
Power supply: 1x 21700
Light source: Luminus SST-70
Waterproof: IP68 (immersion 2 m)