Fenix ​​PD45R ACE rechargeable flashlight, 3200 lm, black

The Fenix ​​PD45R ACE rechargeable tactical flashlight offers a peak luminous flux of up to 3200 lumens (ANSI) and a range of up to 410 meters. Its revolutionary feature is the ability to program your own set of modes exactly to your needs – from a simple Turbo + Strobe combination to a full range of seven functions. No more clicking through unnecessary modes at a critical moment, set only the functions you will actually use.

Thanks to the powerful 6000 mAh battery (included), you won't run out of energy even during long events - the flashlight lasts up to 57 hours on a single charge. The battery is charged directly in the lamp via a modern USB-C connector. An ingenious screw cap protects the charging port from water, dust and dirt even in harsh conditions. Count on lightning-fast and secure control thanks to the tactical switch, plus the flashlight can be locked with the rotating ring and programmed in the SET position. The impact rim on the head of the lamp not only protects the optics, but can also be used to break glass in an emergency or as an effective self-defense tool. The robust design makes the lamp ideal for use by professionals, armed forces and hunters.

All lamp parameters (luminous flux, battery operation time, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Parameters of the Fenix ​​PD45R ACE LED flashlight

• The powerful Luminus SFT-70X-WS65-H2-H1652 LED with a lifespan of 50,000 hours is used.
• Six power modes: 3200 lumens (2.3 hours) -> 1400 lumens (3.3 hours) -> 600 lumens (5.5 hours) -> 300 lumens (9.5 hours) -> 100 lumens (30 hours) -> 30 lumens ( 57 hours ).
• Power is provided by a 21700 type Li-ion battery (ARB-L21-6000 is included in the package)
• Max. battery diameter 22.0 mm, max. Battery length 77.0 mm.
• Run times are measured with a rechargeable 21700 Li-ion battery with a capacity of 6000mAh.
• Patented Intelligent Overheat Protection.
• The lamp has a memory and will always turn on in the last set mode (does not apply to the strobe).
• Dimensions 15.77 cm x 2.59 cm x 3 cm.
• Weight 200.5 grams including battery.
• Made of aircraft hardened aluminum.
• Range up to 410 meters (41,900 cd).
• Impact-resistant from a fall from a height of 1 meter.
• Durable hard-to-scratch surface - Type III hard anodized.
• Waterproof and dustproof according to the IP68 standard (tested under water at a depth of 2 meters for 30 minutes).
• Tactical switch at the end of the flashlight (function of programming modes, flashlight lock, momentary on/off).
• Fixed clip for safe and easy carrying of the lamp (removable).
• Due to its design, the lamp does not rotate when placed.
• The flashlight comes with a Fenix ​​ARB-L21-6000 battery, USB-C charging cable, wrist strap, belt holster, and spare O-rings.
• Optional accessories include: Fenix ​​AER-04 cable switch, AER-05 cable switch, ALG-00 quick-release rail mount, Fenix ​​ALG-16 M-LOK mount, Fenix ​​ALG-18 barrel mount, metal magnetic barrel mount, plastic magnetic barrel mount, ALG-15 quick-release rail mount, optic light mount, metal optic mount, Fenix ​​bicycle mount, AOT-03 white and red traffic cone, ALP-10L holster.

Fenix ​​PD45R ACE flashlight control

On/Off - When the flashlight is unlocked, hold the tactical switch at the end of the flashlight for a silent instant light on, when released the light will turn off. Fully press the tactical switch to turn the light on/off permanently. When the flashlight is on, you can press the tactical switch to switch power modes in the following order: Eco (economical) → Low → Medium → High → Very high → Turbo. The number of modes that can be switched depends on the mode you select.

Strobe activation - With the flashlight on, hold the tactical switch for 0.5 seconds to turn on the strobe. Briefly press the tactical switch again to return to constant lighting.

Setting power modes - In the "SET" position, it is possible to choose between 6 modes, which contain different groups of power modes, see. table below. Turn the switch to the “SET” position to enter the setting. The lamp will flash according to the currently set mode, the number of flashes of the lamp corresponds to the last selected mode number. For example, the light will flash 6 times if mode 6 was last selected, and it will flash 5 times if mode 5 was last selected. Fully press the tactical switch to select the mode, the number of presses must correspond to the number of the mode you want. The light will then flash as many times as the number of the currently selected mode to confirm the selection. Once you have finished selecting a mode, the light will automatically remember your choice. Turn the switch to the unlocked position and use the modes according to your chosen mode.

Lock/Unlock - With the light on, set the rotary switch to the "lock" position to lock the current lighting mode. In this state, the flashlight does not respond to pressing or holding the tactical switch and it cannot be turned off or changed in power. With the light off, set the rotary switch to the "lock" position to lock the tactical rear switch. In this state, the lamp cannot be turned on. Turn the switch from the "lock" position to any other position to unlock the tactical rear switch and use the flashlight normally.

Memory for the last set power mode - The flashlight has a memory for the last set mode and power mode, so it will always turn on in the last set power mode, with the exception of the strobe.

Battery replacement - Unscrew the lamp terminal and insert the battery with the positive pole facing the reflector. Then fully tighten the end cap again.

Charging - Unscrew the protective nut under the head of the light to reveal the charging port and plug the USB-C charging cable into the charging port. Tighten the nut again after charging is complete. During charging, the indicator opposite the charging connector lights up red. It lights up green when fully charged. The lamp cannot be used while charging. The typical charging time for a fully discharged ARB-L21-6000 battery is approximately 3 hours using an 18W USB power source.

Battery charge status indication - Each time you turn it on, the indicator LED opposite the charging connector is activated for three seconds. If the indicator light is green, the battery is charged to more than 85%. Green flashing means 50-85% capacity. If it lights up red, it is charged at 25-50%. Blinking red means less than 25% of battery capacity remains.

Intelligent overheating protection - If the lamp temperature exceeds 60 °C, the power will be automatically reduced. Once the temperature drops below 60°C, the power will gradually increase again.

Low battery warning - If the voltage drops below the set level, the flashlight will reduce the brightness to a lower level. When the lowest power is reached, the battery status indicator will start flashing red to remind you to recharge or replace the battery.

Warning

• Use only high-quality rechargeable batteries of the type 21700 with protective electronics.
• Insert the batteries with the positive pole towards the lamp head.
• If the protective rubber rings appear damaged after a long period of use, replace them. The rings must also be lubricated to prevent rubber erosion. By following these rules, the lamp will be properly protected against water.
• If the light flickers, does not switch to higher power modes, or does not light up, it may be for one of the following reasons: 
  
  • The battery is discharged - charge it or replace it.
  • The contacts inside the lamp are dirty - clean them with a cotton swab dipped in alcohol.
  • The head, body or back of the lamp is loose, tighten them.

Output: 2800lm
Max. durability: 42 hours
Aftersight: 380m
Number of modes: 6
Weight: 169g
Power supply: 1x 21700
Light source: Luminus SFT-70
Waterproof: IP68 (immersion 2 m)