Lapierre OVERVOLT Carbon AM 800+ Bosch, model 2018
These goods are unavailable
Similar products
You can try these searches
Fork: ROCKSHOX PIKE RC 27.5 BOOST 15x110 SOLO AIR 150MM TRAVEL
Damper: ROCKSHOX DELUXE RT 210X52.5 DEBONAIR MM TUNE LOCKOUT
Derailleur: SHIMANO XT RDM8000GS SHADOW+
Cranks: RACEFACE AEFFECT EBIKE 170mm + CHAINGUIDE
Motor / battery: BOSCH CX 500Wh INTUVIA DISPLAY
Cassette: SHIMANO SLX CS7000 11-46T
Chain: SHIMANO HG600 11s
Brakes: SRAM GUIDE RE
Discs: SRAM CENTERLINE 200mm/ 200mm
Shifting: SHIMANO SLX SLM7000
Head assembly: FSA Orbit 1.5 ZS NO.57SC
Handlebars: LAPIERRE Nico Vouilloz 6061DB W: 760mm R: 20mm : 31.8mm
Grips: LAPIERRE DD34 LOCK ON
Stem: LAPIERRE Nico Vouilloz 6061DB CNC : 31.8mm L: 45mm
Seatpost: LAPIERRE DROPPER 100mm travel (S), 125 (M), 150 (L) : 31.6mm L: 350mm
Saddle: LAPIERRE by VELO
Wheels: LAPIERRE eAM+ 584-35c 15x110 with torque caps/ eAM+ 584-35c Boost 12x148 J-bend
Tires: MAXXIS 27.5x2.8 HIGH ROLLER II/ REKON EXO PREOTECTION TUBELESS READY
Pedals: Pedals: VP-917
Accessories: DISPLAY PROTECTION
Product details
Drive | Bosch Performance CX |
Battery | 500 Wh |
Model year | 2018 |
Groupset | Shimano XT, Shimano SLX |
Gears | 1x11 |
Material | carbon fiber |
product ID | 49868 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
comment Reviews
There are currently no reviews