Spirit JOYCE 28 "electric bicycle white, integrated battery 13Ah
A lockable battery with a charging time of 4-6 hours is a matter of course. The drive is handled by a five-speed pedal. The range of an electric bicycle on a single charge ranges from 60 to 90 km. The electric bicycle is able to carry a weight of up to 110 kg.
Frame: material Al 6061, size 18"
Fork: Suntour NEX
Motor: Bafang 36V / 250W BLDC motor with planetary gear in the rear wheel
Battery type: 36V / 13Ah Li-lon, lockable in the frame profile
Range: 60 - 90 km
Cranks: Shimano FC-TY-701/170 mm
Shifters: Shimano Altus SL-M310 (3x7sp)
Derailleur: Shimano Altus
Derailleur: Shimano Altus
Rims: Al 28" double, 36 holes
Brakes: V-brake, Tektro
Handlebars: width 650 mm
Tires : 700x38C (622-40)
Saddle: Selle Royal
Seat post: Promax, diameter 30.4 mm, length 265 mm
Extras: lighting (on / off by holding the + button on the LCD), mudguards, carrier, side stand
Weight: 22.8 kg (including battery)
Gears | 3x7 |
Material | aluminium |
Drive | Bafang |
Battery | 250 Wh |
Brakes | V-brakes |
product ID | 87099 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews