Rock Machine Crossride INT e500 Lady Touring 29 women's electric bike, purple/pink
Rock Machine Crossride INT e500 Lady Touring
Drive |
Shimano STEPS EP800, 36V, 250W, 85Nm
|
Battery |
DARFON, 504 Wh, in-frame mount
|
Display |
Shimano SC-E5003, Clamp band
|
Frame |
Alloy Al-6061 T6 Custom MONO tubing, Smooth Welding, Cross Fun Geometry, Unisex 29er, SHIMANO STEPS DU hanger, 2nd Gen. Battery Integration, OLD 135x9, Disc Brake Post Mount, Fender&Kickstand Ready Dropout, Replaceable RD Hanger, Inner Cable Routing
|
Fork |
SR Suntour NVX30 NLO, 1-1/8", Coil, QR Type, Lockout, 80mm travel
|
Rear derailleur |
SHIMANO DEORE RD-M4120 Shadow Plus
|
Cassette |
Shimano Deore CS-M4100-10, 11-46T
|
Chain |
KMC X10e EPT
|
Cranks |
SHIMANO FC-EM600, 38T
|
BRAKES (FRONT/REAR) |
SHIMANO BL-M4100/BR-MT420, 180/180 rotor, hydraulic disc brake, metallic pads
|
Rims |
WTB SX19, 32H
|
Front hub |
Shimano TX HB-TX505, 32H, Center Lock, QR Type
|
Rear hub |
Shimano TX FH-TX505-8, 32H, CENTER LOCK, M10x135mm, QR Type
|
Spokes |
Sapim Leader, Stainless Black
|
Tires |
WTB Riddler Comp, 29x1.75", Reflective Tape
|
Seat post |
ONE1 Alloy, SP C207, 30.9x350mm
|
Saddle |
Selle Royal Freccia
|
Stem |
ONE1 Sport MAS-D61808 Alloy, 31.8xE65mm, ±15°
|
Handlebars |
ONE1 Alloy, MTB AL-325BT, 6° upsweep, 9° backsweep, 25 mm rise, 680 mm, 31.8mm
|
Grips |
Velo VLG-1879D2, Ergo Grip
|
Headset |
ACROS AZX-251, Zero Stack, 1-1/8", BlockLock
|
Pedals |
Marwi SP-827 SANDBLOCK Non/slip pedal
|
E-bike system |
SHIMANO STEPS EP8 - Middle Drive Unit
|
CHARGER and CHARGING TIME |
DARFON 4A Smart plus charger, charging time up to 4.5 hours
|
Max. speed |
25 km/h
|
Number of charging cycles |
1000/60% of original capacity
|
MAX. TRAVEL DISTANCE ON 1 CHARGE |
120 km (ECO mode) w/EP8 range 20% up
|
Front light |
AXA Compactline 20
|
Rear light |
Spanning Pling
|
Gears |
1x10
|
Shift levers |
Shimano Deore SL-M4100-IR, 10-speed
|
Model year | 2021 |
Gears | 1x10 |
Size | 15.0" (S), 17.0" (M), 19.0" (L) |
Weight | 24.4 kg (size M) |
Material | aluminium |
Drive | Shimano STePS EP8 |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 80 mm |
product ID | 115335 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews