myBoo my Volta Gates, bamboo bicycle, model 2020
Urban Trekking E-Bike with 8-speed Shimano hub and Gates Belt Drive - light, fast, beautiful. Light and powerful Shimano E6000 motor with a torque of 50 Nm. Low-maintenance and reliable Gates CDX timing belt. Each frame is unique and handcrafted in Ghana. Excellent rigidity thanks to the sisal-epoxy resin bond. Verified by all EN standards.
Weight: 25 kg
Motor: Shimano Steps E6000
Display: Shimano Steps E6010
Battery: Shimano Steps E6000 418Wh, 504Wh for extra charge
Range: Up to 120 km in ecological mode
Transmission: Shimano Nexus 8-speed hub
Gear lever: Shimano Alfine Rapidfire
Brakes: Shimano MT200 hydraulic disc brakes
Grips: My Boo Birch Bark Grips
Fork: Aluminum fork
Crank: Shimano Steps Gates
Drive: Gates CDX Toothed belt
Lighting: B&M Avy N 40 Lux
All bicycles are tested up to a load capacity of 125 kilograms.
Model year | 2020 |
Gears | 1x8 |
Groupset | Other |
Material | unspecified |
Drive | Shimano STePS E6000 |
Battery | 400 Wh |
Brakes | Hydraulic disc brakes |
product ID | 90015 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews