Lapierre E-XELIUS 600, model 2019
Frame: NEW eXELIUS SL CARBON DISC THRU AXLE
Fork: XELIUS SL 100% CARBON DISC THRU AXLE
Derailleur: SHIMANO ULTEGRA RD-R8000GS, 11s
Cranks: NEW FSA FAZUA ARMSET ALLOY 50x34T 170 mm (XS, S), 172.5 mm (M), 175 mm (L, XL)
Cassette: SHIMANO 105 CS-HG700 11s 11-34T
Chain: SHIMANO HG601 11s
Gear: NEW SHIMANO 105 2x11 K-R7020 W / HYDRAULIC DISC BRAKES
Head composition: FSA ORBIT C33 1 "1/8 - 1" 1/4 + 15 mm top cover
Handlebars: Lapierre ALLOY 400 mm (XS, S), 420 mm (M, L), 440 mm (XL)
Grips: Lapierre VEXGEL TAPE
Stem: Lapierre ALLOY 7 ° 31.8 mm 80 mm (XS, S), 90 mm (M), 100 mm (L), 110 mm (XL)
Seatpost: Lapierre CARBON 27.2x350 mm
Saddle: NEW Lapierre CrMo
Tires: CONTINENTAL ULTRA SPORT 2 SL 700x28
Pedals: VP-335 CLIPS AND STRAP
Derailleur: NEW SHIMANO 105 FD-R7000FL
Wheels: SHIMANO SMRT76 160 mm F / R
Motor: phase EVATION W / INTEGRATED 250 Wh BATTERY
Model year | 2019 |
Gears | 2x11 |
Groupset | Shimano Ultegra, Shimano 105 |
Material | carbon fiber |
Drive | Fazua |
Battery | 250 Wh |
Brakes | Hydraulic disc brakes |
product ID | 66725 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews