Haibike Nduro 8 Freeride 29/27.5 e-bike, high titan/black/chrome
Choose personal collection at the store and decide on the spot.
Haibike Nduro 8 Freeride 29/27.5 electric bike
Drive |
Yamaha PW-X3, 250 W, 25 km/h, 85 Nm
|
Battery |
Yamaha InTube 720 Wh
|
Display |
Yamaha Interface - X
|
Frame |
Aluminium, Steckachse M12 (1.00) x 148 mm, disc brake Post Mount
|
Fork |
RockShox ZEB Ultimate Charger 3.1 RC2 180 mm
|
Shock |
RockShox Vivid Ultimate RC2T 225x75 mm, Trunnion
|
Shifting |
SRAM GX Eagle 12 speed
|
Cassette |
SRAM GX 1275 Eagle, 10-50T
|
Chain |
SRAM GX Eagle
|
Converter |
SRAM X-Sync II, 38T
|
Brakes |
SRAM DB Maven Bronze, 4 pistons, organic pad, 220 mm / 200 mm
|
Brake levers |
SRAM DB Maven Bronze-BL
|
Wheels |
Mavic E-Deemax
|
Tires |
Schwalbe Magic Mary Evo TLE, 62-622 / Schwalbe Big Betty Evo Gravity, 65-584
|
Seat post |
Dropper Post Remote, 34.9 mm
|
Saddle |
fi'zi:k Terra Aidon X5-160
|
Stem |
Raceface Chester 35 mm
|
Handlebars |
Raceface Atlas Alu, 820 mm
|
Grips |
XLC MTB grips
|
Headset |
Acros BlockLock
|
Sex | Men, Unisex |
Model year | 2025 |
Gears | 1x12 |
Groupset | SRAM GX |
Colour | high titanium/black/chrome |
Material | aluminium |
Wheel diameter | front 29"/rear 27.5" |
Drive | Yamaha |
Battery | 720 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 180 mm |
Shock | Air |
Rear travel | 180 mm |
Telescopic seat post | yes |
product ID | 349620 |
The table is indicative. On the manufacturer's website, you will find geometry and an accurate calculator for each model, which calculates the size based on height, leg and arm length, and preferred riding style.
Size | S | M | L | XL |
---|---|---|---|---|
Rider height (cm) | 159 - 170 | 168 - 179 | 177 - 188 | 186 - 196 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews