Wilier e803TRB PRO XT Di2 1x11, model 2019
Bike fitting discount 50 % (you will save 70 €)
Fork: ROCK SHOX REVELATION RC, TRAVEL 100 MM
Damper: ROCK SHOX MONARCH RL
Derailleur: SHIMANO XT DI2 M8050
Shifters : SHIMANO XT DI2 SL M8050
Cassette: SHIMANO CSM7000 11/46T
Chain: SHIMANO CN-E8000
Cranks: SHIMANO SM-CRE80 34T
Brakes: SHIMANO BL-MT501 + BRMT5020
Wheels: SHIMANO FRONT 203MM, REAR 180MM
Seat post : KS LEV DROPPER POST
Head composition: FSA NO.57B 1"1/8 TOP - 1"1/2 BOTTOM
Stem: PROMAX DA269
Handlebars: PROMAX HB-3188DB
Grips: CASSANO
Wheels: ROVER 26 MM INNER RIM WIDTH
Tires : VITTORIA MEZCAL III 27.5 X 2.6"
Motor: SHIMANO STEPS M8000
Battery: SHIMANO BTE8010 SEMI-INTEGRATED 500 WH
| Model year | 2019 |
| Gears | 1x11 |
| Groupset | Shimano XT, Shimano SLX |
| Material | aluminium |
| Drive | Shimano STePS E8000 |
| Battery | 500 Wh |
| Brakes | Hydraulic disc |
| Control type | electronic |
| product ID | 86316 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.


































































There are currently no reviews