Wilier 101FX Hybrid XT 1x12 SID 966H, model 2020
Bike fitting discount 100 % (you will save 140 €) Free
Fork: ROCK SHOX SID ULTIMATE, 120MM
Wheels: MICHE 966H
Cranks: MICHE ALU 32T
Cassette: SHIMANO SLX 12S 10-51T
Gear: SHIMANO XT 1X12 2.0 SHIFTERS SLX
SHIMANO XT 1X12
Chain: SHIMANO SLX 1X12
Brakes: SHIMANO XT M8000
Tires : VITTORIA BARZO RIGID 29X2.25 "
Stem : RITCHEY COMP
Handlebars: RITCHEY H-BAR MTN
Saddle: SELLE ITALIA X1
Seatpost: RITCHEY COMP V2 31.6 MM
Head composition: RITCHEY COMP
Wheels: SHIMANO 180MM FRONT / 160 MM REAR
Middle composition: FAZUA EVATION SYSTEM
Drive unit: FAZUA EVATION SYSTEM 60 Nm
Battery: 250 Wh
| Model year | 2020 |
| Gears | 1x12 |
| Groupset | Shimano XT, Shimano SLX |
| Material | carbon fiber |
| Drive | Fazua |
| Battery | 250 Wh |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 106173 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

































































There are currently no reviews