Giant Trance 2, model 2020
Fork: FOX 34 Rhythm, stroke 150 mm, GRIP damping, Boost fixed axle 110x15 mm
Muffler: FOX Float DPS Performance
Handlebars: Giant Connect Trail, 780x31.8 mm
Stem: Giant Contact
Seatpost: Giant Contact Switch, telescopic, 30.9 mm
Saddle: Giant Contact (Neutral)
Gearing: Shimano SLX, gears 1x12
Derailleur: Shimano SLX
Brakes: Shimano MT520, 4-piston
Brake levers: Shimano MT501
Cassette: Shimano SLX, 10-51 teeth
Chain: Shimano
Cranks: Shimano SLX, 30-tooth converter
Middle composition: Shimano, press fit
Rims: Giant AM 27.5, 30 mm internal width
Hubs: Shimano Boost, Center-Lock, encapsulated bearings, fixed axles 110x15 and 148x12 mm, rear hub with Micro Spline nut
Spike : Sapim
Tires : front: Maxxis High Roller II EXO TR, 27.5x2.5 WT / rear: Maxxis High Roller II EXO TR, 27.5x2.5 (tubeless)
Accessories: tubeless preparation
| Model year | 2020 |
| Gears | 1x12 |
| Groupset | Shimano SLX |
| Material | aluminium |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 101600 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Zdravim, da sa tu osadit presmyk na ram priamou montazou ? shimano 2x12
Dobrý deň,
podľa fotiek to vyzerá, že je rám pripravený na priamu montáž...ale ešte to preverujem s dodávateľom pre istotu.
Dobrý deň,
takže aj dodávateľ to potvrdil, dá sa.
otazocka, viete dodat aj samostatne ram s tlmicom a hlovovym iba ?
Dobrý deň,
bohužiaľ len bicykel ako celok.
Bude tento bicykel možný kúpiť aj v iných farbách ?
Dobrý deň,
preveríme u dodávateľa a dáme Vám vedieť.
Dobrý deň,
bicykel je dostupný v dvoch farbách Biking Red a
Charcoal. Stačí do poznámky v objednávke napísať farbu.
All the answers to questions about delivery, payment, security, returns, warranty and much else.


































































There are currently no reviews