Ghost SLAMR 4 LC 27.5" (dark blue/white), model 2016
Fork: Fox 32 Float Performance 130 mm 15 mm
Damper: Fox Float DPS Performance 3 Pos 130 mm
Stem: GHOST AS-GH4 31.8 mm
Handlebars: GHOST Low Rizer 740 mm 31.8
Derailleur: Shimano XT 11-Speed Plus
Derailleur (tensioner*): Shimano XT
Shifting: Shimano XT SL
Cranks: Shimano FC-MT 700 36-26
Cassette: Shimano XT 11-40
Chain: Shimano XT
Brakes: Shimano Deore Disc 180 mm SMRT 64
Tires: Schwalbe Nobby Nic Evo 2.25
Rim: Black Jack Ready 25
Front hub: Shimano Deore 15 mm
Rear hub: Shimano Deore 12 mm
Seat post: Kind Shock Cruxi 31.6 adjustable SP internal routing
Saddle: SDG Circuit
Front stroke: 130 mm
Rear stroke: 130 mm
| Model year | 2016 |
| Groupset | Shimano XT, Shimano Deore |
| Material | aluminium |
| Control type | mechanical |
| product ID | 13971 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Dobry den. Chcel by som sa spytat, aky je vahovy rozdiel medzi SLAMR 4 LC a SLAMR 5 27.5 vo velkosti M. Pozeram, ze osadenie je komplet rovnake, takze rozdiel tvori len karbonovy vs hlinikovy ram. Dakujem.
Dobry den,
dovozca zial nema presne zvazene vsetky modely ale vacsinou to byva okolo 700-800 g rozdiel.
Dobrý deň,
mám tento bike a chcem sa opýtať či by bolo možné ho prerobiť na 1/12 verziu + čo všetko by som potreboval vymeniť...
Vďaka
Dobry den,
tak ako ste pisali aj pod inymi produktami - prestavba je mozna.
Okrem spominaneho prevodnika mate zaujem aj o kazetu CS-M5100 - bude sediet, je urcena pre standardny HG orech. Budete potrebovat aj prislusnu prehadzovacku s vacsim rozsahom, napr.: https://www.mtbiker.sk/shop/komponenty/prehadzovace/mtb-10-11-12-prevodov/shimano-deore-m5100-prehadzovacka-11-kolo-super-dlhe-ramienko.html, radiaca packa bude sediet aj povodna. Okrem toho odporucame pri takomto uz pomerne rozsiahlom servise nahodit aj nove lanko a radiaci bowden (vyborne su napr. Optislick modely od Shimana - https://www.mtbiker.sk/shop/komponenty/bowdeny-a-lanka/sady/shimano-optislick-mtb-radiaca-kabelaz.html), a samozrejme s novym prevodnikom/kazetou je urcite dobre nahodit aj novu retaz (z 11-rychlostnych modelov odporucame napr.: https://www.mtbiker.sk/shop/komponenty/retaze/10-11-12-prevodov/shimano-hg901-retaz-11-rychl-116-clankov-nit.html, prip. lacnejsiu https://www.mtbiker.sk/shop/komponenty/retaze/10-11-12-prevodov/kmc-x-11-retaz-11-rychl-118-clankov-s-rychlospojkou.html).
Resp. teraz vidim, ze pri inych produktoch ste sa pytali na 11-rychlostne komponenty, v tomto pripade spominate 1x12 setup - tak prip. upresnite a radi Vam pomozeme s vyberom komponentov Pri prestavbe na 1x12 setup bude potrebna investicia uz o nieco vyssia...
Vďaka za odpoveď,
momentalne preverujem rozdiely/výhody 11 vs 12...
Ak by som sa teda rozhodol pre 11tkovú variantu, máte na výber viac prehadzovačiek, alebo pasovať bude iba tá m5100? Niektoré prehadzovačky nemajú v popise rozsah tak neviem určiť...
Ahoj,
z 11-speed modelov prehadzovaciek zvladne 46T kazetu v 1x11 setupe aj https://www.mtbiker.sk/shop/komponenty/prehadzovace/mtb-10-11-12-prevodov/shimano-xt-m8000-prehadzovacka-11-kolo-super-dlhe-ramienko-sgs-shadow.html, prip. je dostupna aj alternativa od microSHIFTu - https://www.mtbiker.sk/shop/komponenty/prehadzovace/mtb-10-11-12-prevodov/microshift-xle-rd-m665l-11-sp-prehadzovacka-dlhe-ramienko.html#425729. Co sa tyka kaziet s 50+ pastorkami tak jedine spominana prehadzovacka M5100, prip. potom pohon od SRAMu - NX: https://www.mtbiker.sk/shop/komponenty/prehadzovace/mtb-10-11-12-prevodov/sram-nx-prehazovacka-11-kolo-dlhe-ramienko.html#164756, alebo GX: https://www.mtbiker.sk/shop/komponenty/prehadzovace/mtb-10-11-12-prevodov/sram-gx-prehadzovacka-11-kolo-dlhe-ramienko_203697.html#496540 (potrebne bude teda vsak aj SRAM radenie).
All the answers to questions about delivery, payment, security, returns, warranty and much else.


































































There are currently no reviews