Kellys Gate 50 29 ", model 2020
frame size S / M / L
fork ROCK SHOX Recon RL (29) Boost, 100mm, Solo Air / Motion Control / OneLoc Remote Lockout / Maxle Lite 15mm thru axle
main composition FSA 1.5 integrated
middle composition SHIMANO Press-Fit BB- MT500 -PA
handles SHIMANO MT600-B2 (36x26T) - length 170mm (S), 175mm (M - L)
SHIMANO SLX SL- M7000 Rapidfire Plus
SHIMANO SLX M7020 -D derailleur (direct mount)
SHIMANO Deore XT M8000 converter (direct mount)
number of transfers 22
cassette pinion SHIMANO CS-M7000-11 (11-42T)
chain KMC X11 (112 links)
brakes SHIMANO MT400 Hydraulic Disc
brake discs front 180mm / rear 160mm
SHIMANO BL-MT400 brake levers
SHIMANO MT400-B Disc Center Lock Hubs (15x110mm / 12x148mm / 32 holes)
fixed axle front ROCK SHOX Maxle Lite 15x110mm / rear NOVATEC 12x148mm
rims KLS MadMax Disc 622x18 (32 holes)
string stainless steel black
tires SCHWALBE Rapid Rob 57-622 (29x2.25)
stem KLS Advanced - diam 28.6mm / bar bore 31.8mm / 7 ° / length 80mm (S - M), 100mm (L)
handlebars KLS Advanced FlatBar - diam 31.8mm / width 680mm (S), 700mm (M), 720mm (L)
KLS Advancer 2Density handles
seatpost KLS Active - diam 30. 9mm / length 350mm (S - M), 400mm (L)
KLS Avenger saddle
plastic pedals
| Model year | 2020 |
| Gears | 2x11 |
| Groupset | Shimano XT, Shimano SLX, Shimano Deore |
| Material | aluminium |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 89634 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Hello, if I want to put a telescopic seat post on this bike, is it possible to use a seat post with internal Bowden routing? Well thank you.
Dobry deň, v pripade ak chcem na tento bike nahodit teleskopicku sedlovku je možné použiť sedlovku s vnutornym vedenim bowdenov? Ďakujem.
Show translationAutomatically translated
Dobrý deň,
záleží či máte možnosť vnútorného vedenia na bowden tak, aby mohlo lanko zo spodu sedlovky ísť nad stredom s kľukami.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
































































Vynikajúci bicykel, v pomere cena/výkon asi najlepšie, čo sa v danej cenovej kategórii dá zohnať.
Translate by GoogleShow the original