Cannondale F-Si Carbon 2 2016 mountain bike, DEMONSTRATION, size. M
Carbon frame, Lefty fork, the fastest XC racket built as one integrated system.
Demonstration bike, comprehensive warranty, guaranteed technical condition of the bike. Due to the color instability of the first series of F-Si Carbon 2 frames, this model is exclusively replaced with a new frame, including warranty card and full warranty. The fork is color coordinated with the color of the frame.
The refined Ballistec CARBON frame, which is constructed from extra strong carbon fibers used in the arms industry and high strength resin, is extremely light, strong and rigid. The main elements of this frame are the rear asymmetric rear construction and the short rear construction. ASYMMETRIC INETEGRATION is a structure that shifts the drive plane by 6 mm to the right. The rear thread is thus uniform and an extremely rigid rear wheel is created.
The Cannondale F-Si Carbon is equipped with a Lefty 2.0 XLR fork lockable from the handlebars, which stands out for its smooth operation, perfect response, low weight and stiffness. The drive is provided by Cannondale Hollowgram Si cranks. The 11-speed Sram X01 derailleur in combination with a single transmission enables smooth and precise shifting. The braking effect is provided by reliable Magura MT-Race brakes. Cannondale CZero Superlight braided carbon wheels give the bike lightness and dynamism in every step.
Cannondale F-Si Carbon is a bike for XC racers who want to ride the fastest and most advanced machine!
Model year: 2016
Wheel size: 29"
Frame: F-Si Asymmetric, BallisTec Carbon, SPEED SAVE, PF30A, 1.5 Si Head Tube
Fork: Lefty 2.0, 100mm, XLR Isolated Damper Technology with XC+ tune and XLoc remote, Offset - 50mm (S), 55mm (MX)
Cranks: Cannondale HollowGram Si, Ai, BB30, SpideRing 32T
Center composition: Cannondale Alloy PressFit30
Shifters: SRAM X01 (right only)
Cassette: SRAM X1 XG-1180, 10-42 11-speed
Chain: Sram X1, 11-speed
Derailleur: SRAM X01, Type 2 RBC
Rims: Cannondale CZero Superlight Hi-Impact Carbon, Tubeless Ready, 28 hole, 23mm ID, tubeless ready (Ai offset lacing)
Hubs: Lefty 60 front, CZero rear (Ai offset lacing)
Pedals: not available
Brakes: Magura MT-RACE w/ Storm SL Rotors, 180/160mm
Stem: Cannondale C1, 6061 Alloy, 1.5", 31.8, -5 deg.
Head assembly: Cannondale HeadShok Si
Brake levers: Magura MT-RACE w/ Carbotecture body, reach adjust, Shiftmix
Wires: CZero (Ai offset lacing)
Tires: Maxxis Ikon
Saddle: Prologo Zero 2 Satin
Seatpost: Cannondale F-Si SAVE 2 Carbon, 27.2x400mm
Sizes: M
Color: Acid Orange w/ Jet Black, Gloss - ORG
| Model year | 2016 |
| Gears | 1x11 |
| Groupset | SRAM X01, SRAM X1 |
| Material | carbon fiber |
| Control type | mechanical |
| product ID | 41643 |
Mountain, city, cross-country
| Size | Rider height |
|---|---|
| XS | 147-160 cm |
| S | 157-170 cm |
| M | 165-177 cm |
| L | 175-187 cm |
| XL | 182-195 cm |
| XXL | 193-205 cm |
| Size | Rider height |
|---|---|
| 44 | 154-160 cm |
| 48 | 160-170 cm |
| 51 | 165-175 cm |
| 54 | 170-180 cm |
| 56 | 177-185 cm |
| 58 | 182-193 cm |
| 61 | 190-200 cm |
| Size | Rider height |
|---|---|
| Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
prosim vas toto je predvadzaci bicykel velkos L alebo M ? stoho nazvu mam akosik nejasno lebo to skladom jeden kus tam neni ci M alebo L vdaka
Dobrý deň,
jedná sa o bicykel vo veľkosti M, názov produktu sme opravili. Veľkosť je udaná aj v popise produktu a jedná sa teda len o jednu veľkosť.
Dobrý deň , da sa tam vymeniť vidla za Rockshox, alebo Fox?Alebo je uchytenie robene iba pre Lefty?
Dobrý deň,
vidlicu nieje možné vymeniť za požadovanú, nakoľko hlavová trubka má priemer len pre vidlicu Lefty.
Prosím vás, aká je váha tohto bicykla? Ďakujem
Dobrý deň,
Preveríme v externom sklade.
Dobrý deň,
Hmotnosť je 10,7 kg.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

































































There are currently no reviews