Shimano Tiagra 4700 rear brake CS49 10,5 mm assembly pivot lock nut (R50T2)
Shimano Tiagra BR-4700 front rim brake
Progressive performance in all directions - this is the Shimano Tiagra set, which represents a versatile set with technologies adapted from the Dura-Ace set.|
30% more braking power modulation with linear brake operation
|
|
A single thrust journal bearing reduces caliper friction
|
|
Adjustable convergence of the brake shoes
|
|
Better wet performance with an alloy rim
|
|
Brake shoes with adjustable tip
|
| Location | Rear |
| Colour | antracit |
| For rim width | 19 - 26 mm |
| Max tire width | 28C |
| Mounting nut | 10.5 mm |
| Brake pads | R50T5 (alternative to R50T4) |
| Weight | 385 g (front + rear brake) |
| product ID | 47690 |
WARNING
For assistance with installation, adjustment, and replacement of the products which are not found in the user's manual, please contact the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following directions must be always followed in order to prevent personal injuries, physical damages to equipment and the surroundings. The directions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER - Failure to follow the directions will result in death or serious injury.
WARNING - Failure to follow the directions could result in death or serious injury.
CAUTION - Failure to follow the directions could result in personal injury, or physical damage to equipment and surroundings.
WARNING
- Because each bicycle may handle slightly differently depending on the model, learn the proper braking technique (including pressure on the brake lever and bicycle control characteristics) and operation of your bicycle. Improper use of the bicycle's brake system may result in a loss of control or fall, which could lead to serious injury.
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may unexpectedly fall and be seriously injured.
- Do not apply the front brake too strongly. Doing so may cause the front wheel to lock and the bicycle to tip forward, and serious injury may result.
- Because the required braking distance will be longer during wet weather, reduce your speed. Apply the brakes well in advance and gently. You may fall or collide and be seriously injured.
- A wet road surface can cause tires to lose traction. To avoid this, reduce your speed and apply the brakes well in advance and gently. If the tires do happen to lose traction, you may fall and be seriously injured.
- Do not allow any oil or grease to get onto the brake shoes. If the bicycle is ridden with oil or grease on the brake shoes, the brakes may not work, and serious injury could result from a fall or collision.
- Do not use the brake cable if it is rusty, frayed, or cracked. Otherwise, the brakes may not function correctly.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
