Shimano GRX FC-RX600 crankset, 172.5 mm, 1x11, 40T, two-piece
Shimano GRX FC-RX600 Crankset
|
Two-piece cranks with a solid axle designed for 11-speed shifting systems
|
|
Optimal transmission suitable for different terrains and driving styles
|
| Groupset | Shimano GRX |
| Gears | 1x11 |
| Crank length | 172.5 mm |
| Weight | 754 g |
| Number of teeth | 40 |
| Transducer material | aluminium |
| Transducer pitch | 110 mm |
| For the middle width | 68/73 mm |
| Q-factor | 151 mm |
| Chain line | 49.7 mm |
| Rec. bottom bracket | BB-RS501 (thread), BB-RS500-PB (pressfit) |
| product ID | 87259 |
Zdravým , sú tieto kluky kompatibilné aj s 10 rýchlostným radením a reťazou?
Dobrý deň,
kľuky sú určené pre 11r systémy, čiže kompatibilitu s 10r Vám nevieme zaručiť.
Aky stred (mam domcek na lisovany pressfit 86mm) odporucate k tymto klukam?
Dobrý deň prajem,
vhodný by mal byť podľa špecifikácie výrobcu stred BB-RS500 - https://www.mtbiker.sk/shop/komponenty/stredove-zlozenia/press-fit/shimano-loziska-stredove-htii-press-fit-cestne-fc4700-4600-4650-3500-r3000.html.
Aktuálne je bohužiaľ nedostupné, predpokladaný termín doskladnenia overujeme u dodávateľa a budeme Vás informovať.
Dobrý deň prajem,
tak žiaľ podobne ako pri väčšine tovaru od Shimana - dostupnosť spomínaného stredu sa očakáva až na prelome september/október.
Môže sa prípadne ale stať, že nabehne nejaký zabudnutý kus na centrálnom európskom sklade - skúste si kľudne pridať produkt do wishlistu a budete automaticky notifikovaný akonáhle bude stred dostupný.
Zdravím, aký treba na toto kúpiť stred?
Zdravím,
to záleží od možnosti montáže do rámu. Shimano používa závitový stred BSA alebo lisovaný Press Fit.
Mám dirtparade extaze rám klasika domček s roztečou 70mm
Dobrý deň,
kedže ide o cestné kľuky, malo by k ním ísť nasledovné stredové zloženie https://www.mtbiker.sk/shop/komponenty/stredove-zlozenia/misky-hollowtech-ii-gxp/shimano-bb-rs500-ht-ii-105-stredove-zlozenie-cestne.html
Dobry den, rad by som na tejto kluke zmensil ozubene koleso z 40t na 38t. Existuje nejake vhodne prosim?
WARNING:
Consult the place of purchase or a distributor for information on installation, adjustment, and replacement of the products which are not found in the user's manual. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, and follow it for correct use, and store it in a place where you can refer to it at any time.
The following instructions must be always followed in order to prevent personal injury, physical damage to equipment and pollution of the environment. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER – Failure to follow the instructions will result in death or serious injury.
WARNING – Failure to follow the instructions could result in death or serious injury.
CAUTION – Failure to follow the instructions could result in personal injury, or physical damage to equipment and surroundings.
WARNING:
Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
Before riding the bicycle, check that there are no cracks in the crank arms. If there are cracks, the crank arm may break and you may fall off the bicycle.
Be careful not to allow parts of your clothing to get caught in the chain during riding. If you do, you may fall off the bicycle.
CAUTION:
Be careful not to touch the gear teeth of the sprockets. There is a danger of injury.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
