Shimano SPDSL PD-R550 clipless pedals, gray
Shimano SPD-SL PD-R550 pedals
Road pedals PD-R550 of SPD-SL design with an extra wide base of the pedal body for better transmission of pedaling power.|
Carbon composite pedal body for low weight and high stiffness
|
|
Extended bearings and steel axle for greater rigidity and power transmission
|
|
Cartridge pedal axle with easy maintenance
|
|
Easy step in, easy step out, the force can be adjusted
|
|
Including SM-SH11 cleats with 6 ° float
|
| Colour | gray |
| Weight | 310 g (pair) |
| Material | pedal body (composite+steel), axle (chrome+steel) |
| Float | 6° |
| product ID | 203479 |
WARNING
For assistance with installation, adjustment and replacement of the products which are not found in the user's manual, please contact the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions should always be followed in order to prevent personal injury and physical damage to equipment and the surroundings. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury, or physical damage to equipment and surroundings.
WARNING
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
- Before attempting to ride with these pedals and shoes, make sure you understand the operation of the engagement/release mechanism for the pedals and shoes. SPD-SL pedals are designed to release only when you want them to. They are not designed to release automatically in a crash.
- Only use SPD-SL shoes with this product. Other types of shoes may not release from the pedals, or may release unexpectedly.
- Use only SHIMANO cleats and securely tighten the mounting bolts to the shoes. If the bolts are not securely tightened, the foot may not be able to release from the pedal, causing a fall.
- Before you attempt to ride with these pedals and shoes, apply the brakes, then place one foot on the ground and practice engaging and releasing each shoe from the pedal until you can do so instinctively and with minimal effort.
- Practice riding on a level surface first until you become adept at engaging and releasing your shoes from the pedals.
- Before riding, adjust the cleat retention force on the pedals to your liking. If the cleat retention force on the pedals is weak, the shoes may disengage accidentally, you may lose your balance, and you may fall off the bicycle. If the cleat retention force on the pedals is too strong, the shoes may not disengage easily.
- At low speeds or when there is a possibility that you may need to stop (for example, when making a U-turn, at an intersection, when riding uphill or when turning a sharp corner), release the shoes from the pedals beforehand so that you can quickly put your feet onto the ground at any time.
- When riding in adverse conditions, use a lighter cleat retention force to secure the pedal cleats.
- Keep cleats and bindings clear of dirt and debris for proper engagement and release.
- Be sure to check the cleats for wear periodically. When the cleats are worn, replace them and adjust the cleat retention force before riding and after replacing the pedal cleats. If the above warnings are not followed, the shoes may not come out of the pedals when you want them to, or they may come out unexpectedly or accidentally, which could result in serious injury.
- Reflectors must be installed on the bicycle whenever riding on public roadways. Reflectors are sold separately for models that do not come standard with reflectors. Consult your place of purchase or a distributor for information on compatible reflectors.
-If the reflectors are dirty or damaged, it will be difficult for oncoming vehicles to spot you. Replace the reflectors if they are dirty or damaged, and make sure that they are always clean.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
