FORCE TAPER headset, 1 1/8"-1 1/2", integrated
Force TAPER head assembly, 1 1/8"-1 1/2", integrated
| Fork neck | conical (tapered) 1 1/8" - 1.5" |
| Material | aluminium |
| Weight | 118 g |
| Bearings | industrial bearings |
| Height of the top cover | 8 mm |
| Suitable for the upper diameter of the head tube | 42 mm |
| Suitable for the lower diameter of the head tube | 52.2 mm |
| Inner diameter of the fork crown race | Ø - 39.8 mm (with reduction to diameter: Ø - 30 mm) |
| product ID | 125475 |
•
Hello. Is this headset suitable for the DARTMOOR Hornet frame, or is this one better?: https://www.mtbiker.sk/shop/komponenty/hlavove-zlozenia/integrovane/force-taper-hlavove-zlozenie-1-18-1-12-36-al-cierna.html
Automatically translated
•
Dobry den,
obe hlavove zlozenia by mali sadnut, Hornet r. 2014-2022 vyuzival hlavko typu IS42/52, toto konkretne hlavko pod kotrym sa pytate je naviac vybavene aj redukciou na moznost pouzitia vidlice s rovnym 1 1/8" krkom.
•
Hello, I can't decide on a headset. I bought a frameset https://www.specialized.com/sk/sk/enduro-coil-296fattie/p/133842?color=240153-133842 but I have no idea what will fit there. Can you help me choose? Thank you
Automatically translated
•
Dobry den,
podla specifikacie Specialized by malo sadnut hlavko so specifikaciou IS42/28.6 | IS52/40.
T.j. spodne lozisko napr.: https://www.mtbiker.sk/shop/komponenty/hlavove-zlozenia/integrovane/wolf-tooth-performance-lower-is52-40-hlavove-zlozenie-integrovane-p137263.html
Problem je s vrchnym loziskom, resp. atypickou krytkou - vyrabal ju pre Specialized vyrobca FSA. Mozete skusit pripadne kontaktovat predajcu Vasho ramu, pokial ste vrchnu krytku nedostali k ramu.
•
Caveees, I need advice on the composition of the banks from Alza, I'm solving the Sava Carbon 3.2 headset, the dimensions of the bearings should be
28.6X41.8
52 X 30 below was a wreath
The frame is tapered, there was a classic fork with a straight neck inside.
Will this composition be ok for that? Or can you advise? Diiiik
•
Ahoj,
ospravedlnujeme sa za neskorsiu odpoved.
Pokial sa jedna o ram disponujuci hlavovou trubkou urcenou pre integrovane hlavove zlozenia, t.j. standard IS (lozisko sa len "vklada" priamo do ramu, nelisuju sa don ziadne misky), tak hlavko bude sediet - pozor vsak na tie priemery, zial nepodarilo sa mi na strankach Savy najst presnu specifikaciu. Lozisko musi sadnut do ramu naozaj presne, t.j. je potrebne poznat ci sa jedna naozaj o priemer 41.8 mm alebo 42.0 mm apod. Mas k dispozicii prip. povodne hlavove zlozenie? Rozmer loziska je vacsinou vyrazeny priamo na jeho bocnej stene, prip. na tesneni.. Alebo mozes skusit kontaktovat predajcu ramu, potrebnu specifikaciu by ti mali byt schopny dolozit. Drzim palce!
V pripade akychkolvek dalsich otazok nas nevahaj kedykolvek kontaktovat.
•
No áno ja som sa to snažil zistiť , rozmery na starých ložiskách neboli vyrazene včera som tam dal ten MaX1 tak sadlo to ale netuším že či to sedí presne malo by to mať vôľu keď je zle ?
Alebo mám pojazdiť na tom pár km a rozobrať a pozrieť či sa niečo nederie ne ?
•
Jo, zaklad je, ze lozisko musi sadnut uplne presne, akakolvek vola je nepripustna - urcite by ju malo byt vsak po zalozeni nespravneho loziska citit.
Istotou je pripadne premarat povodne lozisko, prip. ho samozrejme priamo porovnat s novym kusom
•
edit
Hello, I bought a Pells frameset and the description for the headset says this: "Headset: integrated tapered 1 1/8-1.5", bearings 41.8/52 mm". I just want to make sure this headset will fit? Thanks. Peter
Automatically translated
•
Dobry den,
skuste pre istotu este premeriat vnutorny priemer hlavovej trubky hore/dole - niekedy sa v desatinach milimetra hlavove trubky lisia a loziska nemusia sadnut presne. Toto konkretne hlavko vyzaduje hlavove trubky s priemerom 42/52.2 mm.
•
Hello, the upper diameter of my head tube is 44mm, the lower 56mm, the fork has a straight tube with a diameter of 28.6mm... which headset do you recommend? Thank you.
Automatically translated
•
hmm, škoda že som sa nedočkal odpovede... ...voľakedy dávnejšie ste vždy vedeli a chceli poradiť...
•
Ahoj, ja niesom support z mtbikeru ale mi prisla sprava lebo som kupival toto hlavko, mas polointegrovane alebo integrovane hlavko?
•
Ked mas polointegrovane a musis nalisovat misku do ramu pouzi toto https://www.mtbiker.sk/shop/komponenty/hlavove-zlozenia/integrovane/force-taper-hlavove-zlozenie-1-1-8-1-1-2-polointegrovane-56-mm-p104441.html?itm_medium=komentare nemaju ho teraz dostupne ale skus najst na inej stranke ked tak, ja jazdim na inom biku uz roku a spokojnost…
•
mám polointegrované... toto by bolo super, ale vydlicu mám s rovným krkom a priemer je 28,6mm, u tohoto hlavového je písané 30mm..nie?
•
U mojho v baleni dosla aj redukcia pre krk aky mas ty… dosiel mi konus na vidlicu s taper krkom aj rovnym…
•
áno reducia je tam na 30mm a ja mám 28,6mm... nebude to vadiť?
•
30mm je vnutorny priemer loziska, v baleni budes mat vymedzivaci konus ktory zmeni rozmer na 28,6mm
•
ok, super idem to objednať,ďakujem ti veľmi pekne za ochotu... už v tom tápam 2dni... díky a pekný večer
•
Pohodicka, rad pomozem aj na servis pouzivam tieto hlavka od force takze dufam ze budes spoko
•
edit
Tu som ti aj nasiel na inej stranke
•
toto mi mi nepasovalo? https://www.mtbiker.sk/shop/komponenty/hlavove-zlozenia/integrovane/ghost-pt-f-11s-tapered-reducer-hlavove-zlozenie-1-1-8-polointegrovane-p178208.html , ale tu je zase spodný rozmer 55mm a ja mám 56mm, tak neviem..
•
Nie nepasovalo, co ja som ti poslal link na tej ceskej stranke ti bude na 100% pasovat
•
Hello, I want to ask if this headset can be used as a replacement for the Acros AIX-322, tapered, IS 42/286-IS52/40 Focus Raven 2021 bike. Thank you
Automatically translated
•
Dobry den,
rozmerovo (priemerovo) hlavko bude sediet, odlisna je akurat vyska spodneho loziska - je o 1 mm vyssie ako v tom Acros hlavku, medzi vidlicou a ramom tak moze byt viditelna teoreticky mala medzera, uhly skosenia (45 stupnov) sedia.
•
Hello, can this headset be used as a replacement for the Darmoore blink? Thank you
Automatically translated
•
Dobry den,
ano, podla specifikacie vyrobcu hlavko bude sediet.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
The best head for this price, I bought it for quite a lot of bikes and I am more satisfied with the quality than with FSA for this price
Automatically translatedI changed to a wreath type, so far it works ok, runs smoothly, I have nothing to complain about.
Automatically translatedgood head for a great price, can handle a lot...
Automatically translatedGreat. But I'd rather it be without the inscriptions.
Automatically translated
dobra cena
Translate by GoogleShow the original
Dobrá cena
Translate by GoogleShow the original
bez výhrad
Translate by GoogleShow the originalThe headset is fine, but I was worried that its lower part would not seal against dust or dirt. That's why I put a reduction ring there, which is lined with rubber around the perimeter and thus does not leave such a gap against the frame. (Cane Creek 110 52/30 mm)
Automatically translated