FORCE reduction of threaded 1" fork on AHEAD, silver
Extension/reduction of the fork neck from the classic 1" thread to 1 1/8 AHEAD.
Material: AL aluminum
Weight: 190 grams
| product ID | 66765 |
•
Užívateľ tomi186 uvádza v hodnotení ze je to len predlzovak krku tak ako to vlastne je?
Zalozim pevnú vidlicu na konci nej je závit čiže _1 head vidla
Dotiahnem hlavové zlozenie jemne.
Nasadim tento produkt dnu do vidlice 22.2mm a dotiahnem a môžem montovať predstavec, riaditka atď?. A potom dotiahnuť všetko na finál?
Diik
•
Dobry den,
ano, redukciu zasuniete do krku vidlice, a sposobom akym sa standardne dotahuje jezko sa v tomto pripade vo vnutri roztiahne a zaisti tak o vonkajsi krk povodnej vidlice.
•
Zdravím vás. Okrem tejto redukcie je este niečo potrebné ? Dištančné krúžky mám, len či to v hlave nebude mať vôlu? Nie je tu nikde údaj o dĺžke. Ďakujem.
•
Dobrý deň,
nebude potrebné nič viac, redukcia sa doťahovaním skrutky v krku roztiahne a tým zaistí - bude to samozrejme celé absolútne bez vôle.
Celkovú dĺžku výrobca bohužiaľ neudáva, a keďže aktuálne je tento produkt dostupný len na externom sklade nášho dodávateľa, tak Vám to nevieme ani fyzicky zmerať. Ak máte záujem o tento údaj, tak dajte vedieť prosím v odpovedi na tento komentár a kontaktujeme výrobcu.
•
zdravim. aky je priemer spodnej casti? mam vidlicu zavitovu 25,4 mm s vnutornym priemerom 22,2 mm. je tato redukcia vhodna? vdaka.
•
Dobrý deň, táto redukcia je pre vás vhodná.
•
zdravim, bude na to pasovat predstavec s priemerom 28.6mm?
•
Dobrý deň,
Áno bude sedieť.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
Sale savings RockShox Crush retaining washer, 8 mm, 1 pc
8.99 €
savings
RRP 13.99 €
RockShox Deluxe/Super Deluxe Metric set of shock absorber inserts, Ø - 8 mm
from 11.99 €
RRP 15.99 €
Clearance Rock Shox pins for rear silencer 1/2 "X1 / 2" 39.9X8mm 3pcs (1 set)
11.99 €
RRP 14.99 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
Exchange on an old bike (approx. 20 years old) so that I can use a separate stem for a handlebar diameter of 31.8 mm and wider handlebars (740 mm), used without a lower reduction to a 1" fork, quality
Automatically translatedGreat thing when you need to raise the stem and handlebars ?
Automatically translatedIt fulfills its purpose well, there is nothing to complain about
Automatically translated
Zatisľ nepoužité. Projekt sa nekoná
Translate by GoogleShow the originalThe inner diameter of the neck of the fork I used it on was less than a mm wider than the extension, but not so much that the additional charge could be used. It could be tightened, but it wasn't stiff enough against turning (even when fully tightened, using the lever on the indus wrench, the handlebars would turn). This is because the surface of the reduction is quite smooth. Roughing it up with sandpaper (80 grit) helped, I used a belt sander. Then it could be tightened well and it holds tight. Otherwise, because there are such inserts for it, it can be used as a reduction, as well as a pure extension of the neck
Automatically translatedI want to point out that this is not a reduction but an extension, because the lower part of this "reduction" has a diameter of 1" (25.4mm) and logically it does not fit into a tube with an outer diameter of 1", but it fits into a tube with an outer diameter of 1 1/ 8". To reduce from a 1" fork to a 1 1/8" tube, a diameter of 22.2mm is needed, but that should be in the description for the customer to get their bearings. Since this is a low price part, the seller doesn't care. This is how I have a piece of aluminum for a shelf at home.
Automatically translated
Dobrý deň prajem,
Translate by GoogleShow the originalkompletná špecifikácia produktu je samozrejme priamo od výrobcu - https://www.force.bike/redukce-vidlice-zavitove-1-na-ahead-al-stribrna/, kde sa uvádza, že sa naozaj jedná o redukciu z 1" (25.4 mm) závitovej vidlice na klasickú A-head vidlicu, resp. predstavec, priemeru 1 1/8" (28.6 mm). Mrzí nás, ak tento popis nekorešponduje s realitou, podľa špecifikácie by to malo sadnúť, taktiež sme doposiaľ nezaznamenali od iných zákazníkov negatívnu odozvu.
Avšak ak výrobok nesadol, tak samozrejme neváhajte využiť možnosť ho vrátiť - https://www.mtbiker.sk/shop/informacie/vsetko-o-nakupe.html, časť "Čo ak sa mi tovar nepozdáva?".
Podarilo sa potom niekde zohnať? Potreboval by som presne ten z 22.2 na predstavec 31.8. Dakujem
Translate by GoogleShow the original
https://www.sadesport.sk/predlzenie-stlpika-vidl-z-22-2-na-a-head-pred-28-6_z7371
Translate by GoogleShow the original