Shimano Acera FC-M361 derailleur, 38T, 3x8
Acera 38 tooth middle chainring for FC-M361 cranks. With specially shaped teeth and chains of the HG system, it ensures an excellent level of shifting.
Type: MTB, Total package weight: 156g, Number of teeth on the chainring: 38, Chainrings: 7/8 speed, For chainring combination: 48/38/28, Number of gears: 3x7/8, Chainring spacing: 104mm, black
| Colour | black |
| Groupset | Shimano Acera |
| Converter mounting | BCD 104 mm |
| product ID | 132230 |
Dobrý deň.Bude tento stredový prevodník pasovať na Shimano Acera FC-M361 kľuky, 3x8, 42/32/22T, štvorhran.Nebude vadiť že má 38T miesto 32T?Bude správne radiť?Vdaka za odpoved.
Dobry den prajem,
prevodnik bude sediet, kazdopadne radenie najma medzi 22T a 38T prevodnikom moze byt tazsie a pomalsie.
Kazdopadne na Vase kluky mozete pouzit aj tento 32T prevodnik: https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/prevodniky/shimano-fc-m361-prevodnik-32t-8-rychl-p90081.html.
existuje toto aj pre 3x9? Mam 44/32/22 a mam v plane 44T prevodnik odstranit a 32T vymenit za 38 a uz som si objednal 26T namiesto 22.
Dobry den,
na ake to pojde kluky?
S roztecou 104 mm BCD dostupny napr. tento 36T: https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/prevodniky/shimano-deore-fc-m590-prevodnik-36t-3x9-p48257.html, alebo potom tento 10-speed 38T, ktory vsak moze sediet aj s 9-rychlostnou retazou: https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/prevodniky/force-10k-prevodnik-38t-p51703.html.
Ten 36T som videl. Pojde to na kluku SanturXCM s roztecou 104mm ako stredne kolecko. Preto si myslim ze 10sp kolecko 38T by riesenie nebolo kedze to by asi neslo osadit ako stredny prevod. Ak ano, opravte moju mylnu predstavu.
Len pre istotu - takze velky 44T prevodnik pojde prec, a miesto povodneho 32T chcete dat 38T a mat tak 2-rychlostny setup, miesto povodneho 3-rychlostneho, ano?
V takom pripade by teoreticky mohol sadnut aj ten 10-speed prevodnik, ma akurat uzsie zuby, co pre 9-rychlostne retaze nebude problem, prakticky moze byt potrebne pouzit len doladovacie podlozky kvoli optimalizacii retazovej linky.
A samozrejme kedze budete zhadzovat prevodnik, tak miesto neho je potrebne bud pouzit tiez podlozky pod skrutky, alebo kupit kratsie skrutky (https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/prislusenstvo/shamanracing-skrutky-do-prevodnikov-5-mm-p2377.html).
Presne ste to pochopili. Dakujem pekne.
Ak by bol predsa s fittingom akykolvek problem, tak nas prosim kontaktujte - vyriesime.
Pekny den prajem
Dobrý den, lze tento převodník použít na kliky FC-M582, vnější převodník, momentálně mám 42 zubů a chci zmenšit.
Díky
Vala
Dobry den,
kluky pouzivate v 3x9 setupe? Pokial ano, tak prevodnik nebude sediet, je urceny pre sirsie 8-rychlostne retaze.
Mame dostupny este napr. tento 36T - https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/prevodniky/shimano-deore-fc-m590-prevodnik-36t-3x9-p48257.html.
WARNING
For assistance with installation, adjustment, and replacement of products not found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to carefully read this “user's manual” before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions must always be followed in order to prevent personal injury and physical damage to equipment and the surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to equipment and the surroundings.
WARNING:
Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
Before riding the bicycle, check that the crank arms are not cracked. If there are cracks, the crank arm may break and you may fall off the bicycle.
Be careful to keep clothing away from the chain while riding. Otherwise, you may fall off the bicycle.
CAUTION:
Be careful not to touch the teeth of the gears. There is a risk of injury.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

spokojnosť, už som ich vymenil niekoľko kusov...dobrá cena. používam ho na elbike
Translate by GoogleShow the originalA classic at a good price
Automatically translated