Shimano GRX FC-RX600-10 HTII cranks, 172.5 mm, 2x10, 46/30T, two-piece, without bearing
Shimano GRX FC-RX600-10 HT II cranks
|
Crank length is 172.5 mm and the chainrings are designed for use with a 10-speed chain
|
|
GRX cranks use the standard Hollowtech II hollow axle construction
|
| Groupset | Shimano GRX |
| Gears | 2x10 |
| Crank length | 172.5 mm |
| Weight | 821 g |
| Number of teeth | 46/30T |
| Q - factor | 151 mm |
| Technology | Hollowtech II |
| Spacing | 110/80 mm |
| Material | aluminium alloy, steel |
| Package contents | right crank with axle and chainring, left crank |
| Chainline | 47 mm |
| product ID | 87264 |
WARNING
For installation, adjustment and replacement information of the products which are not found in the user's manual, consult the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions should always be followed in order to prevent personal injury, damage to equipment or damage to the surroundings. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury, or physical damage to equipment or surroundings.
WARNING:
Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
Before riding the bicycle, check that there are no cracks in the crank arms. If there are cracks, the crank arm may break and you may fall off the bicycle.
Be careful not to allow parts of your clothing to get caught in the chain during riding. If they do, you may fall off the bicycle.
CAUTION:
Be careful not to touch the teeth of the gears. There is a danger of injury.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
