Shimano CLARIS R2000 cranks, 50/34T, 2x8, two parts, without bearing
Shimano CLARIS R2000 cranks
CLARIS R2000 cranks with an integrated axle (2-piece) are intended for 8-speed transmission systems.|
Integrated axle guarantees maximum power transfer from rider to bike
|
|
Four-arm crank design taken from higher end road models
|
|
Recommended BBRS500 bearings, thread or Press fit
|
| Groupset | Shimano Claris |
| Gears | 2x8 |
| Crank length | 170 mm, 175 mm |
| Number of teeth | 50/34T |
| Chainline | 43.5 mm |
| Q - factor | 150 mm |
| Bolt spacing | 110mm/110mm |
| Axle type | Hollowtech II |
| product ID | 52043 |
WARNING
For assistance with installation, adjustment, and replacement of the products which are not found in the user's manual, please contact the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions must be always followed in order to prevent personal injury, physical damage to equipment and the surroundings. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER – Failure to follow the instructions will result in death or serious injury.
WARNING – Failure to follow the instructions could result in death or serious injury.
CAUTION – Failure to follow the instructions could result in personal injury, or physical damage to equipment and surroundings.
WARNING:
Do not disassemble or modify the product. This may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
Before riding the bicycle, check that the crank arms are not cracked. If there are cracks, the crank arm may break and you may fall off the bicycle.
Be careful not to allow parts of your clothing to get caught in the chain during riding. If you do, you may fall off the bicycle.
CAUTION:
Be careful not to touch the teeth of the gears. There is a danger of injury.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
