Shimano Tiagra BR-4700 front rim brake, road
Shimano Tiagra BR-4700 front rim brake
Progressive performance in all directions - this is the Shimano Tiagra set, which represents a versatile set with technologies adapted from the Dura-Ace set.|
30% more braking power modulation with linear brake operation
|
|
A single thrust journal bearing reduces caliper friction
|
|
Adjustable convergence of the brake shoes
|
|
Better wet performance with an alloy rim
|
|
Brake shoes with adjustable tip
|
| Location | Front |
| Colour | antracit |
| For rim width | 19 - 26 mm |
| Max tire width | 28C |
| Mounting nut | 10.5/12.5/18/27 mm |
| Brake pads | R50T5 (alternative to R50T4) |
| Weight | 385 g (front + rear brake) |
| product ID | 47689 |
WARNING
For information on the installation, adjustment and replacement of the products which are not to be found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions should always be followed in order to prevent personal injury, physical damage to equipment and the surroundings. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury, or physical damage to equipment and surroundings.
WARNING
- Because each bicycle may handle slightly differently depending on the model, learn the proper braking technique (including pressure on the brake lever and bicycle handling characteristics) and operation of your bicycle. Improper use of your bicycle's brake system may result in a loss of control or fall, which could lead to serious injury.
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
- Do not apply the front brake too strongly. If you do so, the front wheel may lock and the bicycle may topple forward, and serious injury may result.
- Because the required braking distance will be longer during wet weather, reduce your speed. Apply the brakes well in advance and gently. You may fall or collide and be seriously injured.
- Wet road surfaces may cause the tires to lose traction. To avoid this, reduce your speed and apply the brakes well in advance and gently. If the tires do happen to lose traction, you may fall and be seriously injured.
- Do not allow any oil or grease to get onto the brake shoes. If the bicycle is ridden with oil or grease on the brake shoes, the brakes may not work correctly, and serious injury could result due to a fall or collision.
- Do not use the brake cable if it is rusty, frayed or cracked. If you do, the brakes may not function correctly.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
