Shimano Claris BR-R2000 rear rim brake
Claris road brake shoe. 30% higher braking performance compared to the previous model. Suitable for tires up to a width of 28C.
Type: ROAD, Total package weight: 281g, Rear, gray/black, SLR - SHIMANO Linear Response, CS49 10.5mm, Brake pads: R50T5, Material: Aluminum / Steel
SHIMANO CLARIS components are primarily intended for beginner cyclists who are looking for excellent quality with an aggressive sports design, but are planning short, sporty or longer familiarization rides. The sporty design of the CLARIS components promises the possibility of experiencing an intense driving experience even during the daily routine.
| TECHNICAL SPECIFICATIONS: | |
|---|---|
| Type | Road |
| Packaging | Rear (complete) |
| Brake assembly | Standard |
| Material | Aluminium/Steel |
| Total weight of the package | 281g |
| Location | Rear |
| product ID | 47659 |
WARNING
For assistance with installation, adjustment, and replacement of products not found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this “user's manual” thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following directions should always be followed in order to prevent personal injury, damage to equipment, or damage to the surrounding area. The directions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER – Failure to follow the directions will result in death or serious injury.
WARNING – Failure to follow the directions could result in death or serious injury.
CAUTION – Failure to follow the directions could result in personal injury, or physical damage to equipment or the surrounding area.
WARNING
- Because each bicycle may handle slightly differently depending on the model, learn the proper braking technique (including pressure on the brake lever and bicycle handling characteristics) and operation of your bicycle. Improper use of the bicycle's brake system may result in a loss of control or fall, which could lead to serious injury.
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may unexpectedly fall and be seriously injured.
- Do not apply the front brake too strongly. If you do, the front wheel may lock and the bicycle may topple forward, and serious injury may result.
- Because the required braking distance will be longer during wet weather, reduce your speed. Apply the brakes well in advance and gently. You may fall or collide and be seriously injured.
- A wet road surface can cause tires to lose traction. To avoid this, reduce your speed and apply the brakes well in advance and gently. If the tires do happen to lose traction, you may fall and be seriously injured.
- Do not allow any oil or grease to get onto the brake shoes. If the bicycle is ridden with oil or grease on the brake shoes, the brakes may not work, and serious injury could result from a fall or collision.
- Do not use the brake cable if it is rusty, frayed, or cracked. Otherwise, the brakes may not work correctly.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
