Shimano Tiagra ST-R4720/BR-R7020 Dual Control mech. gear shift/hydr. brake, 2x10, left
Shimano Tiagra ST-R4720/BR-R7020 Dual Control mech. radenie/hydr. brzda
The Tiagra 4720 mechanical dual control levers offer an extended range of lever adjustment and replicate the technologies used in the 105 set. Easier control at the front for quick and intuitive shifting and braking in all situations.|
Installment of a Flat Mount Brake Caliper
|
|
Brake caliper dissipates heat better thanks to Ice Technologies
|
|
Easy to set up and bleed One Way Bleeding
|
| Groupset | Shimano Tiagra |
| Gears | 2x10 |
| Location | Front |
| Brake type | hydraulic |
| Control type | mechanical |
| Hose length | 1 000 mm |
| Mounting type | on a sleeve (lever), flat mount (brake caliper) |
| product ID | 87340 |
WARNING
For assistance with installation, adjustment, and replacement of the products which are not found in the user's manual, please contact the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following directions must be observed at all times in order to prevent personal injury, physical damage to equipment or surroundings. The directions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER - Failure to follow the directions will result in death or serious injury.
WARNING - Failure to follow the directions could result in death or serious injury.
CAUTION - Failure to follow the directions could result in personal injury, or physical damage to equipment or surroundings.
WARNING
- Because each bicycle may handle differently depending on the model, learn the proper braking technique (including pressure on the brake lever and bicycle control characteristics) and operation of your bicycle. Improper use of the bicycle's brake system may result in a loss of control or fall, which could lead to serious injury.
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
- Do not apply the front brake too strongly. If you do, the front wheel may lock and the bicycle may topple forward, and serious injury may result.
- Because the required braking distance will be longer during wet weather, reduce your speed. Apply the brakes well in advance and gently. You may fall or collide and be seriously injured.
- A wet road surface can cause tires to lose traction. To avoid this, reduce your speed and apply the brakes well in advance and gently. If the tires do happen to lose traction, you may fall and be seriously injured.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
