Race Face bottom bracket, BB92, 41x92 mm, Pressfit
Race Face bottom bracket
Bottom bracket with single-row bearings designed for frames with PressFit BB-92 (41x92 mm) in combination with Race Face Cinch cranks with an axle diameter of 30 mm.| Specification | MTB |
| Mount type | BB86-89.5-92 Press Fit |
| Axis type for crankset | BB30 (⌀ - 30 mm) |
| Frame width | 92 mm |
| Weight | 83 g |
| Mount method | Pressfit |
| For crank diameter | 30 mm |
| For frame diameter | 41 mm |
| For frame width | 89/92 mm |
| product ID | 126520 |
Pozdravujem, môžete mi potvrdiť, že toto stredové zloženie je vhodné pre kombináciu:
https://www.mtbiker.sk/shop/bicykle/horske/pevne-a-hardtail/bmc-twostroke-01-four-29-bicykel-cervena-cierna-p186945.html#description
a
https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/mtb/1-prevodnik/race-face-next-sl-carbon-g5-kluky-1x11-12-p107299.html
+ prevodník s 3mm offsetom.
Ďakujem
Dobry den, potvrdzujeme, stredove zlozenie bude sediet.
Dobry den, na obrazku stary stred, vytiahnuty z ramu. Bude mi prosím pasovat tento stred alebo objednat tento X-TYPE https://www.mtbiker.sk/shop/komponenty/stredove-zlozenia/lisovacie-pressfit/race-face-stredove-zlozenie-x-type-bb92-24mm-p107288.html ?? Malinko ma myli ten popis "X-TYPE" Dakujem !
Dobry den, potrebujete ten X-Type variant - je pre kluky s 24 mm oskou.
Tento stred pod ktorym sa pytate je pre 30 mm osky.
Dobrý deň, potrebujem vymeniť press fit za nový a výrobca mi napísal toto: Your bike will use a 30mm BB92 bottom bracket (BB92 CINCH 30mm). Na press fit RF som však čítal dosť zlé recenzie. Viete mi k tomuto odporučiť aj nejakú alternatívu? Ďakujem.
Dobrý deň,
štandard kľúk s 30 mm osou je typický práve pre RF modely, preto nie je ponuka aftermarket výrobcov stredov s týmto rozmerov veľmi široká. Aktuálne je ako alternatíva dostupný napr. posledný 1 ks BB92 stredu od v7robcu e*13: https://www.mtbiker.sk/shop/komponenty/stredove-zlozenia/press-fit/e-13-press-fit-stredove-zlozenie-41-mm-xcp-bb-895bb-92-tini-loziska.html.
Dobrý deň,mám na biku zloženie Shimano BB-MT500 PressFit, 41x92mm, kľuky One1...
Rád by som sa opýtal,či bude toto stredové zloženie pasovať? Ďakujem za odpoveď.
Dobry den prajem,
s povodnymi klukami kompatibilne nebude, toto stredove zlozenie je urcene pre Cinch 30 mm osky, podla Vasho popisu mate kluky s 24 mm oskou. Vhodne tak z tych kvalitnejsich modelov bude napr.: https://www.mtbiker.sk/shop/komponenty/stredove-zlozenia/press-fit/bbb-bbo-29-bottomfit-bb8692.html, prip. BB-MT800 od Shimana - https://www.mtbiker.sk/shop/komponenty/stredove-zlozenia/press-fit/shimano-bb-mt800p-stredove-zlozenie-89592mm-mtb-press-fit-hollowtech-ii.html.
Dobry den. Bude tento produkt vhodny pre Ibis Mojo HD3? V specifikacii vyrobca pise standard 68 mm (BSA) english thread. Dakujem.
Dobrý deň prajem,
žiaľ nie, tento stred sedieť nebude, jedná sa o PressFit-ové stredové zloženie, nie závitové.
Ak zháňate teda BSA stred určený pre kľuky s 30 mm osou, tak sedieť bude napr.: https://www.mtbiker.sk/shop/komponenty/stredove-zlozenia/misky-hollowtech-ii-gxp/race-face-stredove-zlozenie-bsa-6873-30mm.html, príp. https://www.mtbiker.sk/shop/komponenty/stredove-zlozenia/misky-hollowtech-ii-gxp/e-13-bsa-stredove-zlozenie-68-mm.html.
Dobrý deň, je zloženie vhodné pre kľuky Race Face Next R36x26 T Boost? Ďakujem.
Dobrý deň,
stredové zloženie by malo byť vhodné.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

I changed to an enduro bike after 4 years to be safe, which I ride summer/winter/snow/mud/dust
Automatically translatedand after replacing and disassembling the original one, I found out that the bearing didn't need to be replaced at all
That's just because every year it was filled all the way with Vaseline so that the Vaseline completely flowed out of the BB-box and the bike was washed with a sponge/rag, not a sponge.
I've had it on my bike as the original one since the year I bought it (2017) and I haven't had to change it yet, so the spare one is still wrapped. But the bike is in the service center right now and it's possible that it will get a new center. Then I'll finish the review.
Automatically translated
Bolo to čo som potreboval.
Translate by GoogleShow the original
super loziska to ma
Translate by GoogleShow the original
overená klasika
Translate by GoogleShow the original
rýchle dodanie.
Translate by GoogleShow the original
Ok
Translate by GoogleShow the original+ clear graphic assembly instructions
Automatically translatedI thought the case would be made of aluminum, but it seems to be plastic.
Average quality center bearing. Last one lasted less than a year (3000km)
Automatically translated