Kellys Carson 50, model 2020
frame size M / L / XL
fork SR SUNTOUR NEX, 63mm, coil spring (threaded steerer 28.6mm)
main composition TH semi-integrated (threaded)
medium composition semi-integrated (threaded)
medium cartridge composition (120mm)
cranks SHIMANO TY301 (48x38x28T) - length 175mm (M - XL)
shifting SHIMANO (020) ST-EF500-8 EZ-fire Plus
derailleur SHIMANO TY710 (34.9mm)
SHIMANO Acera M360 converter (direct mount)
number of transfers 24
cassette pinion SHIMANO CS-HG200-8 (12-32T)
KMC Z8 chain (114 links)
brakes TEKTRO V-brake
brake levers SHIMANO (020) ST-EF500-8 EZ-fire Plus
SHIMANO Dynamo Nexus C3000 / alloy hubs (32 holes)
rims KLS Draft 622x21 (32 holes / riveted)
string steel
tires INNOVA 44-622 (700x42C)
stem KALLOY Uno adjustable - diam 25.4mm / bar bore 25.4mm / length 100mm
handlebars steel RiseBar - diam 25.4mm / rise 35mm / width 630mm
KLS Wave 2Density ergonomic handles
seatpost KALLOY sprung - diam 30.9mm / length 350mm
saddle SELLE ROYAL Essenza Moderate
pedals NonSlip - plastic
BÜCHEL Urban LED front lighting
rear light BÜCHEL Champs Elysees LED Standlight
fenders RPZ
accessories aluminum alloy carrier, chain cover, stand, bell
Model year | 2020 |
Gears | 3x8 |
Groupset | Shimano Acera |
Material | aluminium |
Brakes | V-brakes |
product ID | 89669 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews