Rock Machine Blizz TRL 40-29 bike, matte sand/black
Rock Machine Blizz TRL 40-29 bike
A universal means of transport for those who do not take cycling too seriously and are looking for an alternative means of transport at an affordable price. That usually means a compromise of heavier weight and only basic component equipment.
Frame |
Alloy Al-6061 T6 Custom tubing, Trail Ultimate Geometry, Shark Spine EVO 29er&27.5+, BB BSA 73 mm, Tapered Head Tube, Boost 148x12, Disc Brake Post Mount, Replaceable RD Hanger, Inner Cable Routing, E-Type Mount, Fork: RST Vibe, Tapered, Air, 140 mm travel
|
Shifting |
microSHIFT ACOLYTE SL-M7180-R, 8 speed
|
Derailleur |
microSHIFT Acolyte RD-M5185M
|
Cassette |
micro SHIFT ACOLYTE 12-46T
|
Chain |
KMC e8S
|
Cranks |
ONE1 TAM38-D32NC, 32T
|
Brakes |
Clarks Clout+, oversize piston, hydraulic disc brake
|
Brake discs |
Clarks Stainless, 180 mm/180 mm
|
Rims |
Stars J30D, 32H
|
Front hub |
ONE1 QLSX9F, 32H, 15x110 mm THRU Type AXLE
|
Rear hub |
ONE1 KTQL2X2MR, 32h, 12x148mm, Thru Axle
|
Spokes |
Sapim Leader, Stainless Black with secure lock nipples
|
Tires |
WTB Ranger Comp, 29x2.30"
|
Seat post |
ONE1 Alloy, MT171, dropper post 170 mm, 30.9 mm
|
Saddle |
WTB Volt
|
Stem |
ONE1 TDS-ALD606 Alloy, 35 mm, 0°
|
Handlebars |
ONE1 Alloy, 9° backsweep, 20 mm rise, 760 mm, 35 mm
|
Grips |
Herrmans Luna Lock
|
Headset |
FSA ZS44/EC49
|
Bottom bracket |
Shimano MT501 BSA
|
Sex | Men, Unisex |
Model year | 2024 |
Gears | 1x8 |
Groupset | microSHIFT Acolyte |
Colour | matte sand/black |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 140 mm |
Telescopic seat post | yes |
product ID | 348052 |
Bike size | M | L | XL |
---|---|---|---|
Height (cm) | 165 - 185 cm | 175 - 195 cm | 185 - 200 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews