Giant TCR Advanced Pro 0 Disc Ui2 bike, amber glow
Giant TCR Advanced Pro 0 Disc Ui2 bike
Frame |
Advanced-Grade Composite, disc
|
Fork |
Advanced-Grade Composite, full-composite OverDrive 2 steerer, disc
|
Shifting |
Shimano Ultegra Di2 ST-R8170
|
Derailleur |
Shimano Ultegra Di2 RD-R8150
|
Derailleur |
Shimano Ultegra Di2 FD-R8150
|
Cassette |
Shimano Ultegra, 12-speed, 11-30T
|
Chain |
Shimano Ultegra
|
Cranks |
Shimano Ultegra, 36/52T
|
Brakes |
Shimano Ultegra Di2 hydraulic, Shimano RT-MT800 rotors [F] 160 mm, [R] 140 mm
|
Brake levers |
Shimano Ultegra Di2 hydraulic
|
Rims |
Giant SLR 1 42 Carbon Disc WheelSystem
|
Hubs |
Giant SLR 1 42 Carbon Disc WheelSystem, 12 mm thru-axle
|
Spokes |
Giant SLR 1 42 Carbon Disc WheelSystem
|
Tires |
CADEX Race, tubeless, 700x25c (26.5 mm), folding
|
Seat post |
Giant Variant, composite, -5/+15mm offset
|
Saddle |
Giant Fleet SL
|
Stem |
Giant Contact SL
|
Handlebars |
Giant Contact SLR
|
Bar tape |
Stratus Lite 2.0
|
Bottom bracket |
Shimano, press fit
|
Additional info |
computer mount, tubeless prepared
|
Model year | 2023 |
Gears | 2x12 |
Groupset | Other |
Size | L, XL |
Material | carbon fiber |
Wheel material | Carbon |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
Max. the width of the tyres | 32 mm |
product ID | 227107 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews