Fuji Transonic Disc 1.1 Satin Carbon/ Chrome Silver, model 2020
Fork: FC-330 carbon monocoque with tapered carbon steerer, and 12mm thru-axle dropout
Cranks: SRAM RED carbon, 48/35T
Middle composition: SRAM DUB, PF30
Derailleur: SRAM RED eTap AXS, braze-on mount
Derailleur: SRAM RED eTap AXS
Shifting: SRAM RED eTap AXS HRD, 2x12-speed
Cassette: SRAM RED XG-1290, 10-33T
Chain: SRAM RED AXS 12-speed with PowerLock
Wheels: Oval Concepts 950 Disc, Centerlock 12mm thru Axle hubs, 700c 24/28H, Carbon Tubeless compatible rims
Tires: Vittoria Open Corsa, 700x25c, 320 tpi, folding
Brakes: SRAM RED Hydraulic, 160/140mm Rotors
Brake levers: SRAM RED eTAP AXS HRD
Head composition: FSA Integrated 1 1/4" upper - 1 1/2" lower sealed bearing
Handlebars: Oval Concepts 990 Aero carbon, 31.8mm clamp, 125mm drop, 75mm reach
Frame: Oval Concepts 790 Aero, 3D-forged, -17 with integrated computer mount
Grips: Anti-Slip Silicone
Saddle: Oval Concepts X38c with pressure relief zone, carbon rail
Seatpost: Oval Concepts Transonic Aero, 300mm 46-52cm/ 350mm 54-61cm
Weight: 7.86 kg
Model year | 2020 |
Gears | 2x12 |
Groupset | SRAM Red |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 99519 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews